Feature bits of a part (PartInfo::features); a clear bit makes the call Unsupported.
More...
|
|
constexpr uint32_t | kScaleRead = 1U << 0 |
| | ReadScaling().
|
| |
|
constexpr uint32_t | kAveraging = 1U << 1 |
| | SetAveraging().
|
| |
|
constexpr uint32_t | kAveragingZero = 1U << 2 |
| | N = 0 (average until read) is legal.
|
| |
|
constexpr uint32_t | kConcentration = 1U << 3 |
| | UpdateConcentration().
|
| |
|
constexpr uint32_t | kSleep = 1U << 4 |
| | Sleep() and WakeUp().
|
| |
|
constexpr uint32_t | kStatusWord = 1U << 5 |
| | The frame carries a status word.
|
| |
|
constexpr uint32_t | kTemperatureFrame = 1U << 6 |
| | The frame carries the temperature.
|
| |
| constexpr uint32_t | kTemperatureRead |
| | ReadTemperature() by a pointer sequence.
|
| |
|
constexpr uint32_t | kGeneralCallReset = 1U << 8 |
| | SoftReset() is the general call.
|
| |
| constexpr uint32_t | kSoftResetCommand |
| | SoftReset() is a command to the device.
|
| |
|
constexpr uint32_t | kResetPin = 1U << 10 |
| | HardReset() pulses /RES (SFM4200).
|
| |
|
constexpr uint32_t | kClockStretch = 1U << 11 |
| | Reads need ReadStretch() (SFM4100).
|
| |
|
constexpr uint32_t | kFilterArg = 1U << 12 |
| | The start command takes a filter argument.
|
| |
|
constexpr uint32_t | kFirstByteAck = 1U << 13 |
| | SF05: the first data byte must be ACKed.
|
| |
|
constexpr uint32_t | kTwoFlows = 1U << 14 |
| | The frame carries two flows (SFM3505).
|
| |
|
constexpr uint32_t | kRestartBeforeRead = 1U << 15 |
| | SF05: start again around each read.
|
| |
| constexpr uint32_t | kPowerCycle |
| | HardReset() is a supply cycle (needs a hook).
|
| |
|
constexpr uint32_t | kWakeByte = 1U << 17 |
| | Wake is address plus one dummy byte.
|
| |
|
constexpr uint32_t | kIrqPin = 1U << 18 |
| | The module has an IRQn or DRDY output.
|
| |
Feature bits of a part (PartInfo::features); a clear bit makes the call Unsupported.
◆ kPowerCycle
| constexpr uint32_t sfm::feature::kPowerCycle |
|
inlineconstexpr |
Initial value:
HardReset() is a supply cycle (needs a hook).
◆ kSoftResetCommand
| constexpr uint32_t sfm::feature::kSoftResetCommand |
|
inlineconstexpr |
Initial value:
SoftReset() is a command to the device.
◆ kTemperatureRead
| constexpr uint32_t sfm::feature::kTemperatureRead |
|
inlineconstexpr |
Initial value:
ReadTemperature() by a pointer sequence.