SFM_FLOW_METER Driver 0.1.0
API reference
Loading...
Searching...
No Matches
Public Attributes | List of all members
sfm::PartInfo Struct Reference

One row of the part table. More...

#include <sfm_flow_meter_parts.hpp>

Public Attributes

Variant variant {Variant::Auto}
 The variant this row describes.
 
Family family {Family::Sf06}
 The command-set family.
 
const char * name {""}
 The vendor's part name.
 
uint32_t id_value {0}
 Product identifier to match (SF06, SFM3505, SFx6000); 0 else.
 
uint32_t id_mask {0}
 Bits of the identifier that are compared; 0 when not used.
 
AddressSet addresses {}
 The permitted 7-bit addresses.
 
uint8_t crc_init {0xFF}
 CRC-8 initial value: 0xFF or 0x00.
 
GasList gases {}
 The calibrated gases.
 
int32_t span_min_mlpm {0}
 Lowest specified flow in ml/min.
 
int32_t span_max_mlpm {0}
 Highest specified flow in ml/min.
 
TempRow temperature {}
 Temperature scaling.
 
uint8_t raw_bits {16}
 16, or 24 for the SFM3505.
 
bool raw_signed {true}
 The flow word is two's complement.
 
Timing timing {}
 Datasheet timings.
 
uint32_t features {0}
 feature:: bits.
 
uint32_t max_clock_hz {0}
 Highest SCL frequency of the part.
 
uint16_t supply_mv_min {0}
 Lowest supply voltage of the sensor.
 
uint16_t supply_mv_max {0}
 Highest supply voltage of the sensor.
 
uint8_t connector {0}
 Connector id of the hardware page (informational).
 
bool preliminary {false}
 The protocol document of the part is preliminary.
 

Detailed Description

One row of the part table.


The documentation for this struct was generated from the following file: