|
SFM_FLOW_METER Driver 0.1.0
API reference
|
| ▼Nsfm | The SFM flow meter driver: everything it declares lives here; internals in detail |
| CAddressSet | The addresses a part may use; list[0] is the default |
| CCapabilities | Which calls a part offers, from its table row |
| CCheckedConfig | A configuration proven valid at build time |
| CConfig | Everything EnsureInitialized() applies |
| CGasList | The gases of a part |
| CGasRow | One calibrated gas of a part: its start code, its status index and its scaling |
| CI2cInterface | CRTP base of the platform I2C port |
| CPartInfo | One row of the part table |
| CProductInfo | The product identifier read at initialisation |
| CRawReply | The words of one reply, after their CRCs were checked and before anything was decoded |
| CResult | The value of a call, or why there is none |
| CResult< void > | The result of a call that returns no value |
| CSample | One measurement. Flow is in millilitres per minute at the part's reference conditions |
| CScaling | Counts per slm as the rational num / den, the offset and the unit word of one gas |
| CScalingInfo | What the sensor reports about the scaling of a gas, and whether it matches the table |
| CSfmFlowMeter | The driver |
| CStats | Counters the driver keeps; none of them is cleared by a successful call |
| CTempRow | The temperature scaling of a part |
| CTiming | Timings of a part in microseconds: the datasheet maxima |
| CWait | A wait the caller owes the driver: delay us, then call Poll(). 0 means nothing to wait |