Skip to content

Changelog

What changed in each release of the driver. Entries under Breaking need source changes in code that used the affected API.

[Unreleased]

Added

  • BASIS 2 driver, first version: the Alicat BASIS 2 gas mass flow meters (B series) and controllers (BC series) over a serial line.
  • ASCII "BASIS Protocol 2" as the default protocol and Modbus RTU in full behind the same typed API (Config::protocol); the Modbus flow decimals are a required field with no default.
  • Bus<Port>: one serial line, one transaction at a time, with the 3.5 character gap, deadlines from the baud rate, quarantine after a failed transaction, stray line detection and a non-blocking Poll(); Basis2<Port>: one instrument, up to 26 per line.
  • Six guarded commands (ChangeUnitId, SetModbusAddress, ChangeBaud, SwitchToProtocol1, SwitchToProtocol2, FactoryRestore), each behind a confirmation token; Recover() and the two scans.
  • Tests against an independent model instrument with fault injection, four fuzz targets and a corpus, compile-fail tests, a host example and ESP-IDF examples (minimal and RS-485 full).