Skip to content

Examples

One folder per platform under examples/, each with its own port, built by CI on every pull request. The driver itself has no platform code; Platforms lists what exists.

Host

examples/host/ runs the driver on any PC against a simulated ADS9324, through the host port host_ads9324_port.hpp. No hardware:

cmake -S examples/host -B build-example && cmake --build build-example && ./build-example/ads9324_host_example

The host tests build it with warnings as errors and run it (CTest ads9324_host_example).

ESP32

ESP-IDF applications that run the driver on an ESP32-C6 DevKitC-1 with an ADS9324 on its SPI bus; the wiring is in the example folder's README and the port in esp32_ads9324_port.hpp. The project points EXTRA_COMPONENT_DIRS at the repository root, which is the driver's ESP-IDF component.

The apps

App What it shows Source CI
ads9324_basic_example Initialise the ADS9324 from menuconfig values and log four of the 16 channels twice a second ads9324_basic_example.cpp yes

Build and flash one (from examples/esp32, ESP-IDF environment loaded):

./scripts/build_app.sh ads9324_basic_example Release
./scripts/flash_app.sh flash_monitor ads9324_basic_example Release

Source of this table: examples/esp32/app_config.yml.

Set up once

git submodule update --init examples/esp32/scripts   # the ESP-IDF build scripts
cd examples/esp32
. $IDF_PATH/export.sh                                 # ESP-IDF v5.5
./scripts/build_app.sh list                           # every app and build type

The scripts read app_config.yml (the same file this page's table comes from) and build each app as its own firmware image.

What to read in an example

You want to Read
See the lifecycle and every Result checked ads9324_basic_example.cpp
Write an ESP-IDF port esp32_ads9324_port.hpp
Use menuconfig values ads9324_kconfig.hpp and _config/Kconfig