TMC9660 Driver 0.1.0
API reference
Loading...
Searching...
No Matches
Classes | Namespaces | Typedefs | Enumerations | Functions | Variables
tmc9660_registers.hpp File Reference

The registers of register mode: block, offset, reset value and access masks of every register of the manual's register map, and the bit fields of each. More...

#include <array>
#include <cstddef>
#include <cstdint>
#include "tmc9660_detail.hpp"

Go to the source code of this file.

Classes

struct  tmc9660::RegAddr
 Address of a register: its block and its offset in the block. More...
 
struct  tmc9660::RegInfo
 One row of the register map. More...
 

Namespaces

namespace  tmc9660
 The TMC9660 driver: everything it declares lives here; internals in detail.
 
namespace  tmc9660::regs
 The registers by name.
 
namespace  tmc9660::fields
 Bit fields, one lower-case namespace per register: fields::mcc_pwm_config::EnableX.
 
namespace  tmc9660::fields::mcc_info_chip
 Fields of MCC_INFO_CHIP.
 
namespace  tmc9660::fields::mcc_adc_i1_i0_raw
 Fields of MCC_ADC_I1_I0_RAW.
 
namespace  tmc9660::fields::mcc_adc_i3_i2_raw
 Fields of MCC_ADC_I3_I2_RAW.
 
namespace  tmc9660::fields::mcc_adc_u1_u0_raw
 Fields of MCC_ADC_U1_U0_RAW.
 
namespace  tmc9660::fields::mcc_adc_u3_u2_raw
 Fields of MCC_ADC_U3_U2_RAW.
 
namespace  tmc9660::fields::mcc_adc_temp_vm_raw
 Fields of MCC_ADC_TEMP_VM_RAW.
 
namespace  tmc9660::fields::mcc_adc_ain1_ain0_raw
 Fields of MCC_ADC_AIN1_AIN0_RAW.
 
namespace  tmc9660::fields::mcc_adc_ain3_ain2_raw
 Fields of MCC_ADC_AIN3_AIN2_RAW.
 
namespace  tmc9660::fields::mcc_adc_i_gen_config
 Fields of MCC_ADC_I_GEN_CONFIG.
 
namespace  tmc9660::fields::mcc_adc_i0_config
 Fields of MCC_ADC_I0_CONFIG.
 
namespace  tmc9660::fields::mcc_adc_i1_config
 Fields of MCC_ADC_I1_CONFIG.
 
namespace  tmc9660::fields::mcc_adc_i2_config
 Fields of MCC_ADC_I2_CONFIG.
 
namespace  tmc9660::fields::mcc_adc_i3_config
 Fields of MCC_ADC_I3_CONFIG.
 
namespace  tmc9660::fields::mcc_adc_i1_i0_scaled
 Fields of MCC_ADC_I1_I0_SCALED.
 
namespace  tmc9660::fields::mcc_adc_i3_i2_scaled
 Fields of MCC_ADC_I3_I2_SCALED.
 
namespace  tmc9660::fields::mcc_adc_iwy_iux
 Fields of MCC_ADC_IWY_IUX.
 
namespace  tmc9660::fields::mcc_adc_iv
 Fields of MCC_ADC_IV.
 
namespace  tmc9660::fields::mcc_adc_status
 Fields of MCC_ADC_STATUS.
 
namespace  tmc9660::fields::mcc_motor_config
 Fields of MCC_MOTOR_CONFIG.
 
namespace  tmc9660::fields::mcc_motion_config
 Fields of MCC_MOTION_CONFIG.
 
namespace  tmc9660::fields::mcc_phi_e_selection
 Fields of MCC_PHI_E_SELECTION.
 
namespace  tmc9660::fields::mcc_phi_e
 Fields of MCC_PHI_E.
 
namespace  tmc9660::fields::mcc_pwm_config
 Fields of MCC_PWM_CONFIG.
 
namespace  tmc9660::fields::mcc_pwm_maxcnt
 Fields of MCC_PWM_MAXCNT.
 
namespace  tmc9660::fields::mcc_pwm_switch_limit
 Fields of MCC_PWM_SWITCH_LIMIT.
 
namespace  tmc9660::fields::mcc_abn_phi_e_phi_m
 Fields of MCC_ABN_PHI_E_PHI_M.
 
namespace  tmc9660::fields::mcc_abn_mode
 Fields of MCC_ABN_MODE.
 
namespace  tmc9660::fields::mcc_abn_cpr
 Fields of MCC_ABN_CPR.
 
namespace  tmc9660::fields::mcc_abn_cpr_inv
 Fields of MCC_ABN_CPR_INV.
 
namespace  tmc9660::fields::mcc_abn_count
 Fields of MCC_ABN_COUNT.
 
namespace  tmc9660::fields::mcc_abn_count_n
 Fields of MCC_ABN_COUNT_N.
 
namespace  tmc9660::fields::mcc_abn_phi_e_offset
 Fields of MCC_ABN_PHI_E_OFFSET.
 
namespace  tmc9660::fields::mcc_hall_mode
 Fields of MCC_HALL_MODE.
 
namespace  tmc9660::fields::mcc_hall_dphi_max
 Fields of MCC_HALL_DPHI_MAX.
 
namespace  tmc9660::fields::mcc_hall_phi_e_offset
 Fields of MCC_HALL_PHI_E_OFFSET.
 
namespace  tmc9660::fields::mcc_hall_count
 Fields of MCC_HALL_COUNT.
 
namespace  tmc9660::fields::mcc_hall_phi_e_extrapolated_phi_e
 Fields of MCC_HALL_PHI_E_EXTRAPOLATED_PHI_E.
 
namespace  tmc9660::fields::mcc_hall_position_060_position_000
 Fields of MCC_HALL_POSITION_060_POSITION_000.
 
namespace  tmc9660::fields::mcc_hall_position_180_position_120
 Fields of MCC_HALL_POSITION_180_POSITION_120.
 
namespace  tmc9660::fields::mcc_hall_position_300_position_240
 Fields of MCC_HALL_POSITION_300_POSITION_240.
 
namespace  tmc9660::fields::mcc_biquad_v_a_1
 Fields of MCC_BIQUAD_V_A_1.
 
namespace  tmc9660::fields::mcc_biquad_v_a_2
 Fields of MCC_BIQUAD_V_A_2.
 
namespace  tmc9660::fields::mcc_biquad_v_b_0
 Fields of MCC_BIQUAD_V_B_0.
 
namespace  tmc9660::fields::mcc_biquad_v_b_1
 Fields of MCC_BIQUAD_V_B_1.
 
namespace  tmc9660::fields::mcc_biquad_v_b_2
 Fields of MCC_BIQUAD_V_B_2.
 
namespace  tmc9660::fields::mcc_biquad_v_enable
 Fields of MCC_BIQUAD_V_ENABLE.
 
namespace  tmc9660::fields::mcc_biquad_t_a_1
 Fields of MCC_BIQUAD_T_A_1.
 
namespace  tmc9660::fields::mcc_biquad_t_a_2
 Fields of MCC_BIQUAD_T_A_2.
 
namespace  tmc9660::fields::mcc_biquad_t_b_0
 Fields of MCC_BIQUAD_T_B_0.
 
namespace  tmc9660::fields::mcc_biquad_t_b_1
 Fields of MCC_BIQUAD_T_B_1.
 
namespace  tmc9660::fields::mcc_biquad_t_b_2
 Fields of MCC_BIQUAD_T_B_2.
 
namespace  tmc9660::fields::mcc_biquad_t_enable
 Fields of MCC_BIQUAD_T_ENABLE.
 
namespace  tmc9660::fields::mcc_velocity_config
 Fields of MCC_VELOCITY_CONFIG.
 
namespace  tmc9660::fields::mcc_velocity_scaling
 Fields of MCC_VELOCITY_SCALING.
 
namespace  tmc9660::fields::mcc_v_min_pos_dev_time_counter_limit
 Fields of MCC_V_MIN_POS_DEV_TIME_COUNTER_LIMIT.
 
namespace  tmc9660::fields::mcc_max_vel_deviation
 Fields of MCC_MAX_VEL_DEVIATION.
 
namespace  tmc9660::fields::mcc_position_config
 Fields of MCC_POSITION_CONFIG.
 
namespace  tmc9660::fields::mcc_max_pos_deviation
 Fields of MCC_MAX_POS_DEVIATION.
 
namespace  tmc9660::fields::mcc_ramper_status
 Fields of MCC_RAMPER_STATUS.
 
namespace  tmc9660::fields::mcc_ramper_a1
 Fields of MCC_RAMPER_A1.
 
namespace  tmc9660::fields::mcc_ramper_a2
 Fields of MCC_RAMPER_A2.
 
namespace  tmc9660::fields::mcc_ramper_a_max
 Fields of MCC_RAMPER_A_MAX.
 
namespace  tmc9660::fields::mcc_ramper_d1
 Fields of MCC_RAMPER_D1.
 
namespace  tmc9660::fields::mcc_ramper_d2
 Fields of MCC_RAMPER_D2.
 
namespace  tmc9660::fields::mcc_ramper_d_max
 Fields of MCC_RAMPER_D_MAX.
 
namespace  tmc9660::fields::mcc_ramper_v_start
 Fields of MCC_RAMPER_V_START.
 
namespace  tmc9660::fields::mcc_ramper_v1
 Fields of MCC_RAMPER_V1.
 
namespace  tmc9660::fields::mcc_ramper_v2
 Fields of MCC_RAMPER_V2.
 
namespace  tmc9660::fields::mcc_ramper_v_stop
 Fields of MCC_RAMPER_V_STOP.
 
namespace  tmc9660::fields::mcc_ramper_v_max
 Fields of MCC_RAMPER_V_MAX.
 
namespace  tmc9660::fields::mcc_ramper_v_target
 Fields of MCC_RAMPER_V_TARGET.
 
namespace  tmc9660::fields::mcc_ramper_switch_mode
 Fields of MCC_RAMPER_SWITCH_MODE.
 
namespace  tmc9660::fields::mcc_ramper_time_config
 Fields of MCC_RAMPER_TIME_CONFIG.
 
namespace  tmc9660::fields::mcc_ramper_a_actual
 Fields of MCC_RAMPER_A_ACTUAL.
 
namespace  tmc9660::fields::mcc_ramper_x_actual
 Fields of MCC_RAMPER_X_ACTUAL.
 
namespace  tmc9660::fields::mcc_ramper_v_actual
 Fields of MCC_RAMPER_V_ACTUAL.
 
namespace  tmc9660::fields::mcc_ramper_x_target
 Fields of MCC_RAMPER_X_TARGET.
 
namespace  tmc9660::fields::mcc_ramper_phi_e
 Fields of MCC_RAMPER_PHI_E.
 
namespace  tmc9660::fields::mcc_ramper_phi_e_offset
 Fields of MCC_RAMPER_PHI_E_OFFSET.
 
namespace  tmc9660::fields::mcc_ramper_acc_ff
 Fields of MCC_RAMPER_ACC_FF.
 
namespace  tmc9660::fields::mcc_ramper_x_actual_latch
 Fields of MCC_RAMPER_X_ACTUAL_LATCH.
 
namespace  tmc9660::fields::mcc_position_actual_latch
 Fields of MCC_POSITION_ACTUAL_LATCH.
 
namespace  tmc9660::fields::mcc_prbs_amplitude
 Fields of MCC_PRBS_AMPLITUDE.
 
namespace  tmc9660::fields::mcc_prbs_down_sampling_ratio
 Fields of MCC_PRBS_DOWN_SAMPLING_RATIO.
 
namespace  tmc9660::fields::mcc_pid_config
 Fields of MCC_PID_CONFIG.
 
namespace  tmc9660::fields::mcc_pid_flux_coeff
 Fields of MCC_PID_FLUX_COEFF.
 
namespace  tmc9660::fields::mcc_pid_torque_coeff
 Fields of MCC_PID_TORQUE_COEFF.
 
namespace  tmc9660::fields::mcc_pid_fieldweak_coeff
 Fields of MCC_PID_FIELDWEAK_COEFF.
 
namespace  tmc9660::fields::mcc_pid_u_s_max
 Fields of MCC_PID_U_S_MAX.
 
namespace  tmc9660::fields::mcc_pid_velocity_coeff
 Fields of MCC_PID_VELOCITY_COEFF.
 
namespace  tmc9660::fields::mcc_pid_position_coeff
 Fields of MCC_PID_POSITION_COEFF.
 
namespace  tmc9660::fields::mcc_pid_position_tolerance
 Fields of MCC_PID_POSITION_TOLERANCE.
 
namespace  tmc9660::fields::mcc_pid_position_tolerance_delay
 Fields of MCC_PID_POSITION_TOLERANCE_DELAY.
 
namespace  tmc9660::fields::mcc_pid_uq_ud_limits
 Fields of MCC_PID_UQ_UD_LIMITS.
 
namespace  tmc9660::fields::mcc_pid_torque_flux_limits
 Fields of MCC_PID_TORQUE_FLUX_LIMITS.
 
namespace  tmc9660::fields::mcc_pid_velocity_limit
 Fields of MCC_PID_VELOCITY_LIMIT.
 
namespace  tmc9660::fields::mcc_pid_position_limit_low
 Fields of MCC_PID_POSITION_LIMIT_LOW.
 
namespace  tmc9660::fields::mcc_pid_position_limit_high
 Fields of MCC_PID_POSITION_LIMIT_HIGH.
 
namespace  tmc9660::fields::mcc_pid_torque_flux_target
 Fields of MCC_PID_TORQUE_FLUX_TARGET.
 
namespace  tmc9660::fields::mcc_pid_torque_flux_offset
 Fields of MCC_PID_TORQUE_FLUX_OFFSET.
 
namespace  tmc9660::fields::mcc_pid_velocity_target
 Fields of MCC_PID_VELOCITY_TARGET.
 
namespace  tmc9660::fields::mcc_pid_velocity_offset
 Fields of MCC_PID_VELOCITY_OFFSET.
 
namespace  tmc9660::fields::mcc_pid_position_target
 Fields of MCC_PID_POSITION_TARGET.
 
namespace  tmc9660::fields::mcc_pid_torque_flux_actual
 Fields of MCC_PID_TORQUE_FLUX_ACTUAL.
 
namespace  tmc9660::fields::mcc_pid_velocity_actual
 Fields of MCC_PID_VELOCITY_ACTUAL.
 
namespace  tmc9660::fields::mcc_pid_position_actual
 Fields of MCC_PID_POSITION_ACTUAL.
 
namespace  tmc9660::fields::mcc_pid_position_actual_offset
 Fields of MCC_PID_POSITION_ACTUAL_OFFSET.
 
namespace  tmc9660::fields::mcc_pid_torque_error
 Fields of MCC_PID_TORQUE_ERROR.
 
namespace  tmc9660::fields::mcc_pid_flux_error
 Fields of MCC_PID_FLUX_ERROR.
 
namespace  tmc9660::fields::mcc_pid_velocity_error
 Fields of MCC_PID_VELOCITY_ERROR.
 
namespace  tmc9660::fields::mcc_pid_position_error
 Fields of MCC_PID_POSITION_ERROR.
 
namespace  tmc9660::fields::mcc_pid_torque_integrator
 Fields of MCC_PID_TORQUE_INTEGRATOR.
 
namespace  tmc9660::fields::mcc_pid_flux_integrator
 Fields of MCC_PID_FLUX_INTEGRATOR.
 
namespace  tmc9660::fields::mcc_pid_velocity_integrator
 Fields of MCC_PID_VELOCITY_INTEGRATOR.
 
namespace  tmc9660::fields::mcc_pid_position_integrator
 Fields of MCC_PID_POSITION_INTEGRATOR.
 
namespace  tmc9660::fields::mcc_pidin_torque_flux_target
 Fields of MCC_PIDIN_TORQUE_FLUX_TARGET.
 
namespace  tmc9660::fields::mcc_pidin_velocity_target
 Fields of MCC_PIDIN_VELOCITY_TARGET.
 
namespace  tmc9660::fields::mcc_pidin_position_target
 Fields of MCC_PIDIN_POSITION_TARGET.
 
namespace  tmc9660::fields::mcc_pidin_torque_flux_target_limited
 Fields of MCC_PIDIN_TORQUE_FLUX_TARGET_LIMITED.
 
namespace  tmc9660::fields::mcc_pidin_velocity_target_limited
 Fields of MCC_PIDIN_VELOCITY_TARGET_LIMITED.
 
namespace  tmc9660::fields::mcc_pidin_position_target_limited
 Fields of MCC_PIDIN_POSITION_TARGET_LIMITED.
 
namespace  tmc9660::fields::mcc_foc_ibeta_ialpha
 Fields of MCC_FOC_IBETA_IALPHA.
 
namespace  tmc9660::fields::mcc_foc_iq_id
 Fields of MCC_FOC_IQ_ID.
 
namespace  tmc9660::fields::mcc_foc_uq_ud
 Fields of MCC_FOC_UQ_UD.
 
namespace  tmc9660::fields::mcc_foc_uq_ud_limited
 Fields of MCC_FOC_UQ_UD_LIMITED.
 
namespace  tmc9660::fields::mcc_foc_ubeta_ualpha
 Fields of MCC_FOC_UBETA_UALPHA.
 
namespace  tmc9660::fields::mcc_foc_uwy_uux
 Fields of MCC_FOC_UWY_UUX.
 
namespace  tmc9660::fields::mcc_foc_uv
 Fields of MCC_FOC_UV.
 
namespace  tmc9660::fields::mcc_pwm_vx2_ux1
 Fields of MCC_PWM_VX2_UX1.
 
namespace  tmc9660::fields::mcc_pwm_y2_wy1
 Fields of MCC_PWM_Y2_WY1.
 
namespace  tmc9660::fields::mcc_velocity_frq
 Fields of MCC_VELOCITY_FRQ.
 
namespace  tmc9660::fields::mcc_velocity_per
 Fields of MCC_VELOCITY_PER.
 
namespace  tmc9660::fields::mcc_u_s_actual_i_s_actual
 Fields of MCC_U_S_ACTUAL_I_S_ACTUAL.
 
namespace  tmc9660::fields::mcc_p_motor
 Fields of MCC_P_MOTOR.
 
namespace  tmc9660::fields::mcc_inputs_raw
 Fields of MCC_INPUTS_RAW.
 
namespace  tmc9660::fields::mcc_outputs_raw
 Fields of MCC_OUTPUTS_RAW.
 
namespace  tmc9660::fields::mcc_status_flags
 Fields of MCC_STATUS_FLAGS.
 
namespace  tmc9660::fields::mcc_gdrv_hw
 Fields of MCC_GDRV_HW.
 
namespace  tmc9660::fields::mcc_gdrv_cfg
 Fields of MCC_GDRV_CFG.
 
namespace  tmc9660::fields::mcc_gdrv_timing
 Fields of MCC_GDRV_TIMING.
 
namespace  tmc9660::fields::mcc_gdrv_bbm
 Fields of MCC_GDRV_BBM.
 
namespace  tmc9660::fields::mcc_gdrv_prot
 Fields of MCC_GDRV_PROT.
 
namespace  tmc9660::fields::mcc_gdrv_ocp_uvw
 Fields of MCC_GDRV_OCP_UVW.
 
namespace  tmc9660::fields::mcc_gdrv_ocp_y2
 Fields of MCC_GDRV_OCP_Y2.
 
namespace  tmc9660::fields::mcc_gdrv_prot_en
 Fields of MCC_GDRV_PROT_EN.
 
namespace  tmc9660::fields::mcc_gdrv_status_en
 Fields of MCC_GDRV_STATUS_EN.
 
namespace  tmc9660::fields::mcc_gdrv_status
 Fields of MCC_GDRV_STATUS.
 
namespace  tmc9660::fields::mcc_gdrv_fault
 Fields of MCC_GDRV_FAULT.
 
namespace  tmc9660::fields::mcc_adc_i1_i0_ext
 Fields of MCC_ADC_I1_I0_EXT.
 
namespace  tmc9660::fields::mcc_adc_i2_ext
 Fields of MCC_ADC_I2_EXT.
 
namespace  tmc9660::fields::mcc_pwm_vx2_ux1_ext
 Fields of MCC_PWM_VX2_UX1_EXT.
 
namespace  tmc9660::fields::mcc_pwm_y2_wy1_ext
 Fields of MCC_PWM_Y2_WY1_EXT.
 
namespace  tmc9660::fields::mcc_pwm_ext_y2_alt
 Fields of MCC_PWM_EXT_Y2_ALT.
 
namespace  tmc9660::fields::mcc_voltage_ext
 Fields of MCC_VOLTAGE_EXT.
 
namespace  tmc9660::fields::mcc_phi_ext
 Fields of MCC_PHI_EXT.
 
namespace  tmc9660::fields::mcc_velocity_ext
 Fields of MCC_VELOCITY_EXT.
 
namespace  tmc9660::fields::adc_src_config
 Fields of ADC_SRC_CONFIG.
 
namespace  tmc9660::fields::adc_setup
 Fields of ADC_SETUP.
 
namespace  tmc9660::fields::adc_status
 Fields of ADC_STATUS.
 
namespace  tmc9660::fields::csa_setup
 Fields of CSA_SETUP.
 
namespace  tmc9660::fields::fault_sts
 Fields of FAULT_STS.
 
namespace  tmc9660::fields::fault_r_int
 Fields of FAULT_R_INT.
 
namespace  tmc9660::fields::fault_r_ena_f
 Fields of FAULT_R_ENA_F.
 

Typedefs

using tmc9660::fields::mcc_adc_i1_i0_raw::I1 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's I1.
 
using tmc9660::fields::mcc_adc_i1_i0_raw::I0 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's I0.
 
using tmc9660::fields::mcc_adc_i3_i2_raw::I3 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's I3.
 
using tmc9660::fields::mcc_adc_i3_i2_raw::I2 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's I2.
 
using tmc9660::fields::mcc_adc_u1_u0_raw::U1 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's U1.
 
using tmc9660::fields::mcc_adc_u1_u0_raw::U0 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's U0.
 
using tmc9660::fields::mcc_adc_u3_u2_raw::U3 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's U3.
 
using tmc9660::fields::mcc_adc_u3_u2_raw::U2 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's U2.
 
using tmc9660::fields::mcc_adc_temp_vm_raw::Temp = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's TEMP.
 
using tmc9660::fields::mcc_adc_temp_vm_raw::Vm = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's VM.
 
using tmc9660::fields::mcc_adc_ain1_ain0_raw::Ain1 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's AIN1.
 
using tmc9660::fields::mcc_adc_ain1_ain0_raw::Ain0 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's AIN0.
 
using tmc9660::fields::mcc_adc_ain3_ain2_raw::Ain3 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's AIN3.
 
using tmc9660::fields::mcc_adc_ain3_ain2_raw::Ain2 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's AIN2.
 
using tmc9660::fields::mcc_adc_i_gen_config::TriggerPos = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, unsigned: the manual's TRIGGER_POS.
 
using tmc9660::fields::mcc_adc_i_gen_config::TriggerSelect = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW: the manual's TRIGGER_SELECT.
 
using tmc9660::fields::mcc_adc_i_gen_config::MeasurementMode = detail::Field< uint32_t, 9U, 3U >
 Bits 11:9, RW: the manual's MEASUREMENT_MODE.
 
using tmc9660::fields::mcc_adc_i_gen_config::Y2Select = detail::Field< uint32_t, 6U, 2U >
 Bits 7:6, RW: the manual's Y2_SELECT.
 
using tmc9660::fields::mcc_adc_i_gen_config::Wy1Select = detail::Field< uint32_t, 4U, 2U >
 Bits 5:4, RW: the manual's WY1_SELECT.
 
using tmc9660::fields::mcc_adc_i_gen_config::Vx2Select = detail::Field< uint32_t, 2U, 2U >
 Bits 3:2, RW: the manual's VX2_SELECT.
 
using tmc9660::fields::mcc_adc_i_gen_config::Ux1Select = detail::Field< uint32_t, 0U, 2U >
 Bits 1:0, RW: the manual's UX1_SELECT.
 
using tmc9660::fields::mcc_adc_i0_config::Scale = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's SCALE.
 
using tmc9660::fields::mcc_adc_i0_config::Offset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's OFFSET.
 
using tmc9660::fields::mcc_adc_i1_config::Scale = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's SCALE.
 
using tmc9660::fields::mcc_adc_i1_config::Offset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's OFFSET.
 
using tmc9660::fields::mcc_adc_i2_config::Scale = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's SCALE.
 
using tmc9660::fields::mcc_adc_i2_config::Offset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's OFFSET.
 
using tmc9660::fields::mcc_adc_i3_config::Scale = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's SCALE.
 
using tmc9660::fields::mcc_adc_i3_config::Offset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's OFFSET.
 
using tmc9660::fields::mcc_adc_i1_i0_scaled::I1 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's I1.
 
using tmc9660::fields::mcc_adc_i1_i0_scaled::I0 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's I0.
 
using tmc9660::fields::mcc_adc_i3_i2_scaled::I3 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's I3.
 
using tmc9660::fields::mcc_adc_i3_i2_scaled::I2 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's I2.
 
using tmc9660::fields::mcc_adc_iwy_iux::Iwy = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's IWY.
 
using tmc9660::fields::mcc_adc_iwy_iux::Iux = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's IUX.
 
using tmc9660::fields::mcc_adc_iv::Iv = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's IV.
 
using tmc9660::fields::mcc_adc_status::TempDone = detail::Field< uint32_t, 29U, 1U >
 Bits 29:29, RW, W1C: the manual's TEMP_DONE.
 
using tmc9660::fields::mcc_adc_status::VmDone = detail::Field< uint32_t, 28U, 1U >
 Bits 28:28, RW, W1C: the manual's VM_DONE.
 
using tmc9660::fields::mcc_adc_status::Ain3Done = detail::Field< uint32_t, 27U, 1U >
 Bits 27:27, RW, W1C: the manual's AIN3_DONE.
 
using tmc9660::fields::mcc_adc_status::Ain2Done = detail::Field< uint32_t, 26U, 1U >
 Bits 26:26, RW, W1C: the manual's AIN2_DONE.
 
using tmc9660::fields::mcc_adc_status::Ain1Done = detail::Field< uint32_t, 25U, 1U >
 Bits 25:25, RW, W1C: the manual's AIN1_DONE.
 
using tmc9660::fields::mcc_adc_status::Ain0Done = detail::Field< uint32_t, 24U, 1U >
 Bits 24:24, RW, W1C: the manual's AIN0_DONE.
 
using tmc9660::fields::mcc_adc_status::U3Done = detail::Field< uint32_t, 23U, 1U >
 Bits 23:23, RW, W1C: the manual's U3_DONE.
 
using tmc9660::fields::mcc_adc_status::U2Done = detail::Field< uint32_t, 22U, 1U >
 Bits 22:22, RW, W1C: the manual's U2_DONE.
 
using tmc9660::fields::mcc_adc_status::U1Done = detail::Field< uint32_t, 21U, 1U >
 Bits 21:21, RW, W1C: the manual's U1_DONE.
 
using tmc9660::fields::mcc_adc_status::U0Done = detail::Field< uint32_t, 20U, 1U >
 Bits 20:20, RW, W1C: the manual's U0_DONE.
 
using tmc9660::fields::mcc_adc_status::I3Done = detail::Field< uint32_t, 19U, 1U >
 Bits 19:19, RW, W1C: the manual's I3_DONE.
 
using tmc9660::fields::mcc_adc_status::I2Done = detail::Field< uint32_t, 18U, 1U >
 Bits 18:18, RW, W1C: the manual's I2_DONE.
 
using tmc9660::fields::mcc_adc_status::I1Done = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW, W1C: the manual's I1_DONE.
 
using tmc9660::fields::mcc_adc_status::I0Done = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, RW, W1C: the manual's I0_DONE.
 
using tmc9660::fields::mcc_adc_status::TempClipped = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, RW, W1C: the manual's TEMP_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::VmClipped = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW, W1C: the manual's VM_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::Ain3Clipped = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW, W1C: the manual's AIN3_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::Ain2Clipped = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW, W1C: the manual's AIN2_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::Ain1Clipped = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW, W1C: the manual's AIN1_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::Ain0Clipped = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW, W1C: the manual's AIN0_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::U3Clipped = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW, W1C: the manual's U3_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::U2Clipped = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW, W1C: the manual's U2_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::U1Clipped = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW, W1C: the manual's U1_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::U0Clipped = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW, W1C: the manual's U0_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::I3Clipped = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW, W1C: the manual's I3_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::I2Clipped = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW, W1C: the manual's I2_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::I1Clipped = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW, W1C: the manual's I1_CLIPPED.
 
using tmc9660::fields::mcc_adc_status::I0Clipped = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW, W1C: the manual's I0_CLIPPED.
 
using tmc9660::fields::mcc_motor_config::Type = detail::Field< uint32_t, 16U, 2U >
 Bits 17:16, RW: the manual's TYPE.
 
using tmc9660::fields::mcc_motor_config::NPolePairs = detail::Field< uint32_t, 0U, 7U >
 Bits 6:0, RW, unsigned: the manual's N_POLE_PAIRS.
 
using tmc9660::fields::mcc_motion_config::Feedforward = detail::Field< uint32_t, 6U, 2U >
 Bits 7:6, RW: the manual's FEEDFORWARD.
 
using tmc9660::fields::mcc_motion_config::RampMode = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW: the manual's RAMP_MODE.
 
using tmc9660::fields::mcc_motion_config::RampEnable = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW: the manual's RAMP_ENABLE.
 
using tmc9660::fields::mcc_motion_config::MotionMode = detail::Field< uint32_t, 0U, 4U >
 Bits 3:0, RW: the manual's MOTION_MODE.
 
using tmc9660::fields::mcc_phi_e_selection::PhiESelection = detail::Field< uint32_t, 0U, 4U >
 Bits 3:0, RW: the manual's PHI_E_SELECTION.
 
using tmc9660::fields::mcc_phi_e::PhiE = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PHI_E.
 
using tmc9660::fields::mcc_pwm_config::DutyCycleOffset = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, unsigned: the manual's DUTY_CYCLE_OFFSET.
 
using tmc9660::fields::mcc_pwm_config::ExtEnableY2 = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's EXT_ENABLE_Y2.
 
using tmc9660::fields::mcc_pwm_config::ExtEnableWy1 = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, RW: the manual's EXT_ENABLE_WY1.
 
using tmc9660::fields::mcc_pwm_config::ExtEnableVx2 = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, RW: the manual's EXT_ENABLE_VX2.
 
using tmc9660::fields::mcc_pwm_config::ExtEnableUx1 = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW: the manual's EXT_ENABLE_UX1.
 
using tmc9660::fields::mcc_pwm_config::EnableY2 = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW: the manual's ENABLE_Y2.
 
using tmc9660::fields::mcc_pwm_config::EnableWy1 = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW: the manual's ENABLE_WY1.
 
using tmc9660::fields::mcc_pwm_config::EnableVx2 = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW: the manual's ENABLE_VX2.
 
using tmc9660::fields::mcc_pwm_config::EnableUx1 = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW: the manual's ENABLE_UX1.
 
using tmc9660::fields::mcc_pwm_config::Y2HsSrc = detail::Field< uint32_t, 6U, 2U >
 Bits 7:6, RW: the manual's Y2_HS_SRC.
 
using tmc9660::fields::mcc_pwm_config::SvMode = detail::Field< uint32_t, 4U, 2U >
 Bits 5:4, RW: the manual's SV_MODE.
 
using tmc9660::fields::mcc_pwm_config::Chop = detail::Field< uint32_t, 0U, 3U >
 Bits 2:0, RW: the manual's CHOP.
 
using tmc9660::fields::mcc_pwm_maxcnt::PwmMaxcnt = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's PWM_MAXCNT.
 
using tmc9660::fields::mcc_pwm_switch_limit::PwmSwitchLimit = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's PWM_SWITCH_LIMIT.
 
using tmc9660::fields::mcc_abn_phi_e_phi_m::PhiE = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's PHI_E.
 
using tmc9660::fields::mcc_abn_phi_e_phi_m::PhiM = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PHI_M.
 
using tmc9660::fields::mcc_abn_mode::Direction = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW: the manual's DIRECTION.
 
using tmc9660::fields::mcc_abn_mode::Cln = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW: the manual's CLN.
 
using tmc9660::fields::mcc_abn_mode::DisableFilter = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW: the manual's DISABLE_FILTER.
 
using tmc9660::fields::mcc_abn_mode::ClearCountOnN = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW: the manual's CLEAR_COUNT_ON_N.
 
using tmc9660::fields::mcc_abn_mode::CombinedN = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's COMBINED_N.
 
using tmc9660::fields::mcc_abn_mode::NPol = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's N_POL.
 
using tmc9660::fields::mcc_abn_mode::BPol = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's B_POL.
 
using tmc9660::fields::mcc_abn_mode::APol = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's A_POL.
 
using tmc9660::fields::mcc_abn_cpr::AbnCpr = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, unsigned: the manual's ABN_CPR.
 
using tmc9660::fields::mcc_abn_count::AbnCount = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, unsigned: the manual's ABN_COUNT.
 
using tmc9660::fields::mcc_abn_count_n::AbnCountN = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, unsigned: the manual's ABN_COUNT_N.
 
using tmc9660::fields::mcc_abn_phi_e_offset::AbnPhiEOffset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's ABN_PHI_E_OFFSET.
 
using tmc9660::fields::mcc_hall_mode::Filter = detail::Field< uint32_t, 8U, 8U >
 Bits 15:8, RW, unsigned: the manual's FILTER.
 
using tmc9660::fields::mcc_hall_mode::Order = detail::Field< uint32_t, 4U, 3U >
 Bits 6:4, RW: the manual's ORDER.
 
using tmc9660::fields::mcc_hall_mode::Extrapolation = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's EXTRAPOLATION.
 
using tmc9660::fields::mcc_hall_mode::Polarity = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's POLARITY.
 
using tmc9660::fields::mcc_hall_dphi_max::HallDphiMax = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's HALL_DPHI_MAX.
 
using tmc9660::fields::mcc_hall_phi_e_offset::HallPhiEOffset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's HALL_PHI_E_OFFSET.
 
using tmc9660::fields::mcc_hall_count::HallCount = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's HALL_COUNT.
 
using tmc9660::fields::mcc_hall_phi_e_extrapolated_phi_e::PhiEExtrapolated = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's PHI_E_EXTRAPOLATED.
 
using tmc9660::fields::mcc_hall_phi_e_extrapolated_phi_e::PhiE = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PHI_E.
 
using tmc9660::fields::mcc_hall_position_060_position_000::Position060 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's POSITION_060.
 
using tmc9660::fields::mcc_hall_position_060_position_000::Position000 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's POSITION_000.
 
using tmc9660::fields::mcc_hall_position_180_position_120::Position180 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's POSITION_180.
 
using tmc9660::fields::mcc_hall_position_180_position_120::Position120 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's POSITION_120.
 
using tmc9660::fields::mcc_hall_position_300_position_240::Position300 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's POSITION_300.
 
using tmc9660::fields::mcc_hall_position_300_position_240::Position240 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's POSITION_240.
 
using tmc9660::fields::mcc_biquad_v_a_1::BiquadVA1 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_V_A_1.
 
using tmc9660::fields::mcc_biquad_v_a_2::BiquadVA2 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_V_A_2.
 
using tmc9660::fields::mcc_biquad_v_b_0::BiquadVB0 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_V_B_0.
 
using tmc9660::fields::mcc_biquad_v_b_1::BiquadVB1 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_V_B_1.
 
using tmc9660::fields::mcc_biquad_v_b_2::BiquadVB2 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_V_B_2.
 
using tmc9660::fields::mcc_biquad_v_enable::BiquadVEnable = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's BIQUAD_V_ENABLE.
 
using tmc9660::fields::mcc_biquad_t_a_1::BiquadTA1 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_T_A_1.
 
using tmc9660::fields::mcc_biquad_t_a_2::BiquadTA2 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_T_A_2.
 
using tmc9660::fields::mcc_biquad_t_b_0::BiquadTB0 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_T_B_0.
 
using tmc9660::fields::mcc_biquad_t_b_1::BiquadTB1 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_T_B_1.
 
using tmc9660::fields::mcc_biquad_t_b_2::BiquadTB2 = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, RW, signed: the manual's BIQUAD_T_B_2.
 
using tmc9660::fields::mcc_biquad_t_enable::BiquadTEnable = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's BIQUAD_T_ENABLE.
 
using tmc9660::fields::mcc_velocity_config::MovingAvrgFilterSamples = detail::Field< uint32_t, 12U, 3U >
 Bits 14:12, RW: the manual's MOVING_AVRG_FILTER_SAMPLES.
 
using tmc9660::fields::mcc_velocity_config::MeterType = detail::Field< uint32_t, 9U, 2U >
 Bits 10:9, RW: the manual's METER_TYPE.
 
using tmc9660::fields::mcc_velocity_config::MeterSyncPulse = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW: the manual's METER_SYNC_PULSE.
 
using tmc9660::fields::mcc_velocity_config::Selection = detail::Field< uint32_t, 0U, 8U >
 Bits 7:0, RW: the manual's SELECTION.
 
using tmc9660::fields::mcc_velocity_scaling::VelocityScaling = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's VELOCITY_SCALING.
 
using tmc9660::fields::mcc_v_min_pos_dev_time_counter_limit::VMinPosDev = detail::Field< uint32_t, 16U, 15U >
 Bits 30:16, RW, unsigned: the manual's V_MIN_POS_DEV.
 
using tmc9660::fields::mcc_v_min_pos_dev_time_counter_limit::TimeCounterLimit = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's TIME_COUNTER_LIMIT.
 
using tmc9660::fields::mcc_max_vel_deviation::MaxVelDeviation = detail::Field< uint32_t, 0U, 31U >
 Bits 30:0, RW, unsigned: the manual's MAX_VEL_DEVIATION.
 
using tmc9660::fields::mcc_position_config::Selection = detail::Field< uint32_t, 0U, 8U >
 Bits 7:0, RW: the manual's SELECTION.
 
using tmc9660::fields::mcc_max_pos_deviation::MaxPosDeviation = detail::Field< uint32_t, 0U, 31U >
 Bits 30:0, RW, unsigned: the manual's MAX_POS_DEVIATION.
 
using tmc9660::fields::mcc_ramper_status::StallInPosErr = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, R: the manual's STALL_IN_POS_ERR.
 
using tmc9660::fields::mcc_ramper_status::StallInVelErr = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, R: the manual's STALL_IN_VEL_ERR.
 
using tmc9660::fields::mcc_ramper_status::SecondMove = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW, W1C: the manual's SECOND_MOVE.
 
using tmc9660::fields::mcc_ramper_status::TZerowaitActive = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, R: the manual's T_ZEROWAIT_ACTIVE.
 
using tmc9660::fields::mcc_ramper_status::VZero = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, R: the manual's V_ZERO.
 
using tmc9660::fields::mcc_ramper_status::PositionReached = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, R: the manual's POSITION_REACHED.
 
using tmc9660::fields::mcc_ramper_status::VelocityReached = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, R: the manual's VELOCITY_REACHED.
 
using tmc9660::fields::mcc_ramper_status::EventPosReached = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW, W1C: the manual's EVENT_POS_REACHED.
 
using tmc9660::fields::mcc_ramper_status::EventStopSg = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW, W1C: the manual's EVENT_STOP_SG.
 
using tmc9660::fields::mcc_ramper_status::EventStopH = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, R: the manual's EVENT_STOP_H.
 
using tmc9660::fields::mcc_ramper_status::EventStopR = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, R: the manual's EVENT_STOP_R.
 
using tmc9660::fields::mcc_ramper_status::EventStopL = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, R: the manual's EVENT_STOP_L.
 
using tmc9660::fields::mcc_ramper_status::StatusLatchH = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW, W1C: the manual's STATUS_LATCH_H.
 
using tmc9660::fields::mcc_ramper_status::StatusLatchR = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW, W1C: the manual's STATUS_LATCH_R.
 
using tmc9660::fields::mcc_ramper_status::StatusLatchL = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW, W1C: the manual's STATUS_LATCH_L.
 
using tmc9660::fields::mcc_ramper_status::StatusStopH = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, R: the manual's STATUS_STOP_H.
 
using tmc9660::fields::mcc_ramper_status::StatusStopR = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, R: the manual's STATUS_STOP_R.
 
using tmc9660::fields::mcc_ramper_status::StatusStopL = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, R: the manual's STATUS_STOP_L.
 
using tmc9660::fields::mcc_ramper_a1::RamperA1 = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_A1.
 
using tmc9660::fields::mcc_ramper_a2::RamperA2 = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_A2.
 
using tmc9660::fields::mcc_ramper_a_max::RamperAMax = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_A_MAX.
 
using tmc9660::fields::mcc_ramper_d1::RamperD1 = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_D1.
 
using tmc9660::fields::mcc_ramper_d2::RamperD2 = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_D2.
 
using tmc9660::fields::mcc_ramper_d_max::RamperDMax = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_D_MAX.
 
using tmc9660::fields::mcc_ramper_v_start::RamperVStart = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_V_START.
 
using tmc9660::fields::mcc_ramper_v1::RamperV1 = detail::Field< uint32_t, 0U, 27U >
 Bits 26:0, RW, unsigned: the manual's RAMPER_V1.
 
using tmc9660::fields::mcc_ramper_v2::RamperV2 = detail::Field< uint32_t, 0U, 27U >
 Bits 26:0, RW, unsigned: the manual's RAMPER_V2.
 
using tmc9660::fields::mcc_ramper_v_stop::RamperVStop = detail::Field< uint32_t, 0U, 23U >
 Bits 22:0, RW, unsigned: the manual's RAMPER_V_STOP.
 
using tmc9660::fields::mcc_ramper_v_max::RamperVMax = detail::Field< uint32_t, 0U, 27U >
 Bits 26:0, RW, unsigned: the manual's RAMPER_V_MAX.
 
using tmc9660::fields::mcc_ramper_v_target::RamperVTarget = detail::Field< uint32_t, 0U, 28U >
 Bits 27:0, RW, signed: the manual's RAMPER_V_TARGET.
 
using tmc9660::fields::mcc_ramper_switch_mode::VelocityOverwrite = detail::Field< uint32_t, 19U, 1U >
 Bits 19:19, RW: the manual's VELOCITY_OVERWRITE.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopOnVelDeviation = detail::Field< uint32_t, 18U, 1U >
 Bits 18:18, RW: the manual's STOP_ON_VEL_DEVIATION.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopOnPosDeviation = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW: the manual's STOP_ON_POS_DEVIATION.
 
using tmc9660::fields::mcc_ramper_switch_mode::SwHardStop = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, RW: the manual's SW_HARD_STOP.
 
using tmc9660::fields::mcc_ramper_switch_mode::SoftstopEnable = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's SOFTSTOP_ENABLE.
 
using tmc9660::fields::mcc_ramper_switch_mode::SgStopEnable = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, RW: the manual's SG_STOP_ENABLE.
 
using tmc9660::fields::mcc_ramper_switch_mode::LatchHInactive = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW: the manual's LATCH_H_INACTIVE.
 
using tmc9660::fields::mcc_ramper_switch_mode::LatchHActive = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW: the manual's LATCH_H_ACTIVE.
 
using tmc9660::fields::mcc_ramper_switch_mode::LatchRInactive = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW: the manual's LATCH_R_INACTIVE.
 
using tmc9660::fields::mcc_ramper_switch_mode::LatchRActive = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW: the manual's LATCH_R_ACTIVE.
 
using tmc9660::fields::mcc_ramper_switch_mode::LatchLInactive = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW: the manual's LATCH_L_INACTIVE.
 
using tmc9660::fields::mcc_ramper_switch_mode::LatchLActive = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW: the manual's LATCH_L_ACTIVE.
 
using tmc9660::fields::mcc_ramper_switch_mode::SwapLr = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW: the manual's SWAP_LR.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopHPol = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW: the manual's STOP_H_POL.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopRPol = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW: the manual's STOP_R_POL.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopLPol = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's STOP_L_POL.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopHEnable = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's STOP_H_ENABLE.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopREnable = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's STOP_R_ENABLE.
 
using tmc9660::fields::mcc_ramper_switch_mode::StopLEnable = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's STOP_L_ENABLE.
 
using tmc9660::fields::mcc_ramper_time_config::TVmax = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, unsigned: the manual's T_VMAX.
 
using tmc9660::fields::mcc_ramper_time_config::TZerowait = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's T_ZEROWAIT.
 
using tmc9660::fields::mcc_ramper_a_actual::RamperAActual = detail::Field< uint32_t, 0U, 24U >
 Bits 23:0, R, signed: the manual's RAMPER_A_ACTUAL.
 
using tmc9660::fields::mcc_ramper_v_actual::RamperVActual = detail::Field< uint32_t, 0U, 28U >
 Bits 27:0, R, signed: the manual's RAMPER_V_ACTUAL.
 
using tmc9660::fields::mcc_ramper_phi_e::RamperPhiE = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's RAMPER_PHI_E.
 
using tmc9660::fields::mcc_ramper_phi_e_offset::RamperPhiEOffset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's RAMPER_PHI_E_OFFSET.
 
using tmc9660::fields::mcc_ramper_acc_ff::Shift = detail::Field< uint32_t, 16U, 3U >
 Bits 18:16, RW: the manual's SHIFT.
 
using tmc9660::fields::mcc_ramper_acc_ff::Gain = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's GAIN.
 
using tmc9660::fields::mcc_prbs_down_sampling_ratio::PrbsDownSamplingRatio = detail::Field< uint32_t, 0U, 8U >
 Bits 7:0, RW, unsigned: the manual's PRBS_DOWN_SAMPLING_RATIO.
 
using tmc9660::fields::mcc_pid_config::VelSmpl = detail::Field< uint32_t, 24U, 7U >
 Bits 30:24, RW, unsigned: the manual's VEL_SMPL.
 
using tmc9660::fields::mcc_pid_config::PosSmpl = detail::Field< uint32_t, 16U, 7U >
 Bits 22:16, RW, unsigned: the manual's POS_SMPL.
 
using tmc9660::fields::mcc_pid_config::VelScale = detail::Field< uint32_t, 12U, 4U >
 Bits 15:12, RW, unsigned: the manual's VEL_SCALE.
 
using tmc9660::fields::mcc_pid_config::PositionNormI = detail::Field< uint32_t, 10U, 2U >
 Bits 11:10, RW: the manual's POSITION_NORM_I.
 
using tmc9660::fields::mcc_pid_config::PositionNormP = detail::Field< uint32_t, 8U, 2U >
 Bits 9:8, RW: the manual's POSITION_NORM_P.
 
using tmc9660::fields::mcc_pid_config::VelocityNormI = detail::Field< uint32_t, 6U, 2U >
 Bits 7:6, RW: the manual's VELOCITY_NORM_I.
 
using tmc9660::fields::mcc_pid_config::VelocityNormP = detail::Field< uint32_t, 4U, 2U >
 Bits 5:4, RW: the manual's VELOCITY_NORM_P.
 
using tmc9660::fields::mcc_pid_config::CurrentNormI = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's CURRENT_NORM_I.
 
using tmc9660::fields::mcc_pid_config::CurrentNormP = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's CURRENT_NORM_P.
 
using tmc9660::fields::mcc_pid_config::KeepPosTarget = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's KEEP_POS_TARGET.
 
using tmc9660::fields::mcc_pid_flux_coeff::P = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's P.
 
using tmc9660::fields::mcc_pid_flux_coeff::I = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's I.
 
using tmc9660::fields::mcc_pid_torque_coeff::P = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's P.
 
using tmc9660::fields::mcc_pid_torque_coeff::I = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's I.
 
using tmc9660::fields::mcc_pid_fieldweak_coeff::P = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's P.
 
using tmc9660::fields::mcc_pid_fieldweak_coeff::I = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's I.
 
using tmc9660::fields::mcc_pid_u_s_max::USMax = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's U_S_MAX.
 
using tmc9660::fields::mcc_pid_velocity_coeff::P = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's P.
 
using tmc9660::fields::mcc_pid_velocity_coeff::I = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's I.
 
using tmc9660::fields::mcc_pid_position_coeff::P = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's P.
 
using tmc9660::fields::mcc_pid_position_coeff::I = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's I.
 
using tmc9660::fields::mcc_pid_position_tolerance::PidPositionTolerance = detail::Field< uint32_t, 0U, 31U >
 Bits 30:0, RW, unsigned: the manual's PID_POSITION_TOLERANCE.
 
using tmc9660::fields::mcc_pid_position_tolerance_delay::PidPositionToleranceDelay = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's PID_POSITION_TOLERANCE_DELAY.
 
using tmc9660::fields::mcc_pid_uq_ud_limits::PidUqUdLimits = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's PID_UQ_UD_LIMITS.
 
using tmc9660::fields::mcc_pid_torque_flux_limits::PidTorqueLimit = detail::Field< uint32_t, 16U, 15U >
 Bits 30:16, RW, unsigned: the manual's PID_TORQUE_LIMIT.
 
using tmc9660::fields::mcc_pid_torque_flux_limits::PidFluxLimit = detail::Field< uint32_t, 0U, 15U >
 Bits 14:0, RW, unsigned: the manual's PID_FLUX_LIMIT.
 
using tmc9660::fields::mcc_pid_velocity_limit::PidVelocityLimit = detail::Field< uint32_t, 0U, 31U >
 Bits 30:0, RW, unsigned: the manual's PID_VELOCITY_LIMIT.
 
using tmc9660::fields::mcc_pid_torque_flux_target::PidTorqueTarget = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's PID_TORQUE_TARGET.
 
using tmc9660::fields::mcc_pid_torque_flux_target::PidFluxTarget = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's PID_FLUX_TARGET.
 
using tmc9660::fields::mcc_pid_torque_flux_offset::PidTorqueOffset = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's PID_TORQUE_OFFSET.
 
using tmc9660::fields::mcc_pid_torque_flux_offset::PidFluxOffset = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's PID_FLUX_OFFSET.
 
using tmc9660::fields::mcc_pid_torque_flux_actual::PidTorqueActual = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's PID_TORQUE_ACTUAL.
 
using tmc9660::fields::mcc_pid_torque_flux_actual::PidFluxActual = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PID_FLUX_ACTUAL.
 
using tmc9660::fields::mcc_pid_torque_error::PidTorqueError = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PID_TORQUE_ERROR.
 
using tmc9660::fields::mcc_pid_flux_error::PidFluxError = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PID_FLUX_ERROR.
 
using tmc9660::fields::mcc_pidin_torque_flux_target::PidinTorqueTarget = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's PIDIN_TORQUE_TARGET.
 
using tmc9660::fields::mcc_pidin_torque_flux_target::PidinFluxTarget = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PIDIN_FLUX_TARGET.
 
using tmc9660::fields::mcc_pidin_torque_flux_target_limited::PidinTorqueTargetLimited = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's PIDIN_TORQUE_TARGET_LIMITED.
 
using tmc9660::fields::mcc_pidin_torque_flux_target_limited::PidinFluxTargetLimited = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's PIDIN_FLUX_TARGET_LIMITED.
 
using tmc9660::fields::mcc_foc_ibeta_ialpha::Ibeta = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's IBETA.
 
using tmc9660::fields::mcc_foc_ibeta_ialpha::Ialpha = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's IALPHA.
 
using tmc9660::fields::mcc_foc_iq_id::Iq = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's IQ.
 
using tmc9660::fields::mcc_foc_iq_id::Id = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's ID.
 
using tmc9660::fields::mcc_foc_uq_ud::Uq = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's UQ.
 
using tmc9660::fields::mcc_foc_uq_ud::Ud = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's UD.
 
using tmc9660::fields::mcc_foc_uq_ud_limited::Uq = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's UQ.
 
using tmc9660::fields::mcc_foc_uq_ud_limited::Ud = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's UD.
 
using tmc9660::fields::mcc_foc_ubeta_ualpha::Ubeta = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's UBETA.
 
using tmc9660::fields::mcc_foc_ubeta_ualpha::Ualpha = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's UALPHA.
 
using tmc9660::fields::mcc_foc_uwy_uux::Uwy = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, signed: the manual's UWY.
 
using tmc9660::fields::mcc_foc_uwy_uux::Uux = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's UUX.
 
using tmc9660::fields::mcc_foc_uv::Uv = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, signed: the manual's UV.
 
using tmc9660::fields::mcc_pwm_vx2_ux1::Vx2 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, unsigned: the manual's VX2.
 
using tmc9660::fields::mcc_pwm_vx2_ux1::Ux1 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, unsigned: the manual's UX1.
 
using tmc9660::fields::mcc_pwm_y2_wy1::Y2 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, unsigned: the manual's Y2.
 
using tmc9660::fields::mcc_pwm_y2_wy1::Wy1 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, unsigned: the manual's WY1.
 
using tmc9660::fields::mcc_u_s_actual_i_s_actual::USActual = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, R, unsigned: the manual's U_S_ACTUAL.
 
using tmc9660::fields::mcc_u_s_actual_i_s_actual::ISActual = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, R, unsigned: the manual's I_S_ACTUAL.
 
using tmc9660::fields::mcc_inputs_raw::HallWFilt = detail::Field< uint32_t, 22U, 1U >
 Bits 22:22, R: the manual's HALL_W_FILT.
 
using tmc9660::fields::mcc_inputs_raw::HallVFilt = detail::Field< uint32_t, 21U, 1U >
 Bits 21:21, R: the manual's HALL_V_FILT.
 
using tmc9660::fields::mcc_inputs_raw::HallUFilt = detail::Field< uint32_t, 20U, 1U >
 Bits 20:20, R: the manual's HALL_U_FILT.
 
using tmc9660::fields::mcc_inputs_raw::Eni = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, R: the manual's ENI.
 
using tmc9660::fields::mcc_inputs_raw::RefSwH = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, R: the manual's REF_SW_H.
 
using tmc9660::fields::mcc_inputs_raw::RefSwL = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, R: the manual's REF_SW_L.
 
using tmc9660::fields::mcc_inputs_raw::RefSwR = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, R: the manual's REF_SW_R.
 
using tmc9660::fields::mcc_inputs_raw::HallW = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, R: the manual's HALL_W.
 
using tmc9660::fields::mcc_inputs_raw::HallV = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, R: the manual's HALL_V.
 
using tmc9660::fields::mcc_inputs_raw::HallU = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, R: the manual's HALL_U.
 
using tmc9660::fields::mcc_inputs_raw::EncN = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, R: the manual's ENC_N.
 
using tmc9660::fields::mcc_inputs_raw::EncB = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, R: the manual's ENC_B.
 
using tmc9660::fields::mcc_inputs_raw::EncA = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, R: the manual's ENC_A.
 
using tmc9660::fields::mcc_outputs_raw::PwmY2H = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, R: the manual's PWM_Y2_H.
 
using tmc9660::fields::mcc_outputs_raw::PwmY2L = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, R: the manual's PWM_Y2_L.
 
using tmc9660::fields::mcc_outputs_raw::PwmWy1H = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, R: the manual's PWM_WY1_H.
 
using tmc9660::fields::mcc_outputs_raw::PwmWy1L = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, R: the manual's PWM_WY1_L.
 
using tmc9660::fields::mcc_outputs_raw::PwmVx2H = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, R: the manual's PWM_VX2_H.
 
using tmc9660::fields::mcc_outputs_raw::PwmVx2L = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, R: the manual's PWM_VX2_L.
 
using tmc9660::fields::mcc_outputs_raw::PwmUx1H = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, R: the manual's PWM_UX1_H.
 
using tmc9660::fields::mcc_outputs_raw::PwmUx1L = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, R: the manual's PWM_UX1_L.
 
using tmc9660::fields::mcc_status_flags::Eni = detail::Field< uint32_t, 31U, 1U >
 Bits 31:31, RW, W1C: the manual's ENI.
 
using tmc9660::fields::mcc_status_flags::EncN = detail::Field< uint32_t, 28U, 1U >
 Bits 28:28, RW, W1C: the manual's ENC_N.
 
using tmc9660::fields::mcc_status_flags::AdcIClipped = detail::Field< uint32_t, 26U, 1U >
 Bits 26:26, RW, W1C: the manual's ADC_I_CLIPPED.
 
using tmc9660::fields::mcc_status_flags::PositionReached = detail::Field< uint32_t, 23U, 1U >
 Bits 23:23, RW, W1C: the manual's POSITION_REACHED.
 
using tmc9660::fields::mcc_status_flags::RefSwH = detail::Field< uint32_t, 22U, 1U >
 Bits 22:22, RW, W1C: the manual's REF_SW_H.
 
using tmc9660::fields::mcc_status_flags::RefSwR = detail::Field< uint32_t, 21U, 1U >
 Bits 21:21, RW, W1C: the manual's REF_SW_R.
 
using tmc9660::fields::mcc_status_flags::RefSwL = detail::Field< uint32_t, 20U, 1U >
 Bits 20:20, RW, W1C: the manual's REF_SW_L.
 
using tmc9660::fields::mcc_status_flags::Short = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW, W1C: the manual's SHORT.
 
using tmc9660::fields::mcc_status_flags::PidFwOutputLimit = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, RW, W1C: the manual's PID_FW_OUTPUT_LIMIT.
 
using tmc9660::fields::mcc_status_flags::VelocityTrackingError = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, RW, W1C: the manual's VELOCITY_TRACKING_ERROR.
 
using tmc9660::fields::mcc_status_flags::PositionTrackingError = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW, W1C: the manual's POSITION_TRACKING_ERROR.
 
using tmc9660::fields::mcc_status_flags::HallError = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW, W1C: the manual's HALL_ERROR.
 
using tmc9660::fields::mcc_status_flags::PwmSwitchLimitActive = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW, W1C: the manual's PWM_SWITCH_LIMIT_ACTIVE.
 
using tmc9660::fields::mcc_status_flags::IparkVoltlimLimitU = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW, W1C: the manual's IPARK_VOLTLIM_LIMIT_U.
 
using tmc9660::fields::mcc_status_flags::PidIqOutputLimit = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW, W1C: the manual's PID_IQ_OUTPUT_LIMIT.
 
using tmc9660::fields::mcc_status_flags::PidIqTargetLimit = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW, W1C: the manual's PID_IQ_TARGET_LIMIT.
 
using tmc9660::fields::mcc_status_flags::PidIdOutputLimit = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW, W1C: the manual's PID_ID_OUTPUT_LIMIT.
 
using tmc9660::fields::mcc_status_flags::PidIdTargetLimit = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW, W1C: the manual's PID_ID_TARGET_LIMIT.
 
using tmc9660::fields::mcc_status_flags::PidVOutputLimit = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW, W1C: the manual's PID_V_OUTPUT_LIMIT.
 
using tmc9660::fields::mcc_status_flags::PidVTargetLimit = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW, W1C: the manual's PID_V_TARGET_LIMIT.
 
using tmc9660::fields::mcc_status_flags::PidXOutputLimit = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW, W1C: the manual's PID_X_OUTPUT_LIMIT.
 
using tmc9660::fields::mcc_status_flags::PidXTargetLimit = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW, W1C: the manual's PID_X_TARGET_LIMIT.
 
using tmc9660::fields::mcc_gdrv_hw::HsAsLsY2 = detail::Field< uint32_t, 28U, 1U >
 Bits 28:28, RW: the manual's HS_AS_LS_Y2.
 
using tmc9660::fields::mcc_gdrv_hw::BiasEn = detail::Field< uint32_t, 25U, 1U >
 Bits 25:25, RW: the manual's BIAS_EN.
 
using tmc9660::fields::mcc_gdrv_hw::ChargepumpEn = detail::Field< uint32_t, 24U, 1U >
 Bits 24:24, RW: the manual's CHARGEPUMP_EN.
 
using tmc9660::fields::mcc_gdrv_hw::BstSwCpEn = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW: the manual's BST_SW_CP_EN.
 
using tmc9660::fields::mcc_gdrv_hw::BstIlimMax = detail::Field< uint32_t, 8U, 3U >
 Bits 10:8, RW: the manual's BST_ILIM_MAX.
 
using tmc9660::fields::mcc_gdrv_hw::VsUvloCmpEn = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW: the manual's VS_UVLO_CMP_EN.
 
using tmc9660::fields::mcc_gdrv_hw::VdrvUvloCmpEn = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW: the manual's VDRV_UVLO_CMP_EN.
 
using tmc9660::fields::mcc_gdrv_hw::HsOcpCmpEn = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW: the manual's HS_OCP_CMP_EN.
 
using tmc9660::fields::mcc_gdrv_hw::LsOcpCmpEn = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW: the manual's LS_OCP_CMP_EN.
 
using tmc9660::fields::mcc_gdrv_hw::BridgeEnableY2 = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's BRIDGE_ENABLE_Y2.
 
using tmc9660::fields::mcc_gdrv_hw::BridgeEnableW = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's BRIDGE_ENABLE_W.
 
using tmc9660::fields::mcc_gdrv_hw::BridgeEnableV = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's BRIDGE_ENABLE_V.
 
using tmc9660::fields::mcc_gdrv_hw::BridgeEnableU = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's BRIDGE_ENABLE_U.
 
using tmc9660::fields::mcc_gdrv_cfg::VsUvloLvl = detail::Field< uint32_t, 20U, 4U >
 Bits 23:20, RW: the manual's VS_UVLO_LVL.
 
using tmc9660::fields::mcc_gdrv_cfg::AdaptiveModeY2 = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW: the manual's ADAPTIVE_MODE_Y2.
 
using tmc9660::fields::mcc_gdrv_cfg::AdaptiveModeUvw = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, RW: the manual's ADAPTIVE_MODE_UVW.
 
using tmc9660::fields::mcc_gdrv_cfg::IgateSourceY2 = detail::Field< uint32_t, 12U, 4U >
 Bits 15:12, RW: the manual's IGATE_SOURCE_Y2.
 
using tmc9660::fields::mcc_gdrv_cfg::IgateSinkY2 = detail::Field< uint32_t, 8U, 4U >
 Bits 11:8, RW: the manual's IGATE_SINK_Y2.
 
using tmc9660::fields::mcc_gdrv_cfg::IgateSourceUvw = detail::Field< uint32_t, 4U, 4U >
 Bits 7:4, RW: the manual's IGATE_SOURCE_UVW.
 
using tmc9660::fields::mcc_gdrv_cfg::IgateSinkUvw = detail::Field< uint32_t, 0U, 4U >
 Bits 3:0, RW: the manual's IGATE_SINK_UVW.
 
using tmc9660::fields::mcc_gdrv_timing::TDriveSourceY2 = detail::Field< uint32_t, 24U, 8U >
 Bits 31:24, RW, unsigned: the manual's T_DRIVE_SOURCE_Y2.
 
using tmc9660::fields::mcc_gdrv_timing::TDriveSinkY2 = detail::Field< uint32_t, 16U, 8U >
 Bits 23:16, RW, unsigned: the manual's T_DRIVE_SINK_Y2.
 
using tmc9660::fields::mcc_gdrv_timing::TDriveSourceUvw = detail::Field< uint32_t, 8U, 8U >
 Bits 15:8, RW, unsigned: the manual's T_DRIVE_SOURCE_UVW.
 
using tmc9660::fields::mcc_gdrv_timing::TDriveSinkUvw = detail::Field< uint32_t, 0U, 8U >
 Bits 7:0, RW, unsigned: the manual's T_DRIVE_SINK_UVW.
 
using tmc9660::fields::mcc_gdrv_bbm::BbmHY2 = detail::Field< uint32_t, 24U, 8U >
 Bits 31:24, RW, unsigned: the manual's BBM_H_Y2.
 
using tmc9660::fields::mcc_gdrv_bbm::BbmLY2 = detail::Field< uint32_t, 16U, 8U >
 Bits 23:16, RW, unsigned: the manual's BBM_L_Y2.
 
using tmc9660::fields::mcc_gdrv_bbm::BbmHUvw = detail::Field< uint32_t, 8U, 8U >
 Bits 15:8, RW, unsigned: the manual's BBM_H_UVW.
 
using tmc9660::fields::mcc_gdrv_bbm::BbmLUvw = detail::Field< uint32_t, 0U, 8U >
 Bits 7:0, RW, unsigned: the manual's BBM_L_UVW.
 
using tmc9660::fields::mcc_gdrv_prot::TermPwmOnShort = detail::Field< uint32_t, 28U, 1U >
 Bits 28:28, RW: the manual's TERM_PWM_ON_SHORT.
 
using tmc9660::fields::mcc_gdrv_prot::HsRetriesY2 = detail::Field< uint32_t, 22U, 2U >
 Bits 23:22, RW: the manual's HS_RETRIES_Y2.
 
using tmc9660::fields::mcc_gdrv_prot::LsRetriesY2 = detail::Field< uint32_t, 20U, 2U >
 Bits 21:20, RW: the manual's LS_RETRIES_Y2.
 
using tmc9660::fields::mcc_gdrv_prot::HsRetriesUvw = detail::Field< uint32_t, 18U, 2U >
 Bits 19:18, RW: the manual's HS_RETRIES_UVW.
 
using tmc9660::fields::mcc_gdrv_prot::LsRetriesUvw = detail::Field< uint32_t, 16U, 2U >
 Bits 17:16, RW: the manual's LS_RETRIES_UVW.
 
using tmc9660::fields::mcc_gdrv_prot::VgsBlankingY2 = detail::Field< uint32_t, 12U, 2U >
 Bits 13:12, RW: the manual's VGS_BLANKING_Y2.
 
using tmc9660::fields::mcc_gdrv_prot::VgsDeglitchY2 = detail::Field< uint32_t, 8U, 3U >
 Bits 10:8, RW: the manual's VGS_DEGLITCH_Y2.
 
using tmc9660::fields::mcc_gdrv_prot::VgsBlankingUvw = detail::Field< uint32_t, 4U, 2U >
 Bits 5:4, RW: the manual's VGS_BLANKING_UVW.
 
using tmc9660::fields::mcc_gdrv_prot::VgsDeglitchUvw = detail::Field< uint32_t, 0U, 3U >
 Bits 2:0, RW: the manual's VGS_DEGLITCH_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_uvw::HsOcpThresUvw = detail::Field< uint32_t, 24U, 4U >
 Bits 27:24, RW: the manual's HS_OCP_THRES_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_uvw::HsOcpBlankingUvw = detail::Field< uint32_t, 20U, 3U >
 Bits 22:20, RW: the manual's HS_OCP_BLANKING_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_uvw::HsOcpDeglitchUvw = detail::Field< uint32_t, 16U, 3U >
 Bits 18:16, RW: the manual's HS_OCP_DEGLITCH_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_uvw::LsOcpUseVdsUvw = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's LS_OCP_USE_VDS_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_uvw::LsOcpThresUvw = detail::Field< uint32_t, 8U, 4U >
 Bits 11:8, RW: the manual's LS_OCP_THRES_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_uvw::LsOcpBlankingUvw = detail::Field< uint32_t, 4U, 3U >
 Bits 6:4, RW: the manual's LS_OCP_BLANKING_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_uvw::LsOcpDeglitchUvw = detail::Field< uint32_t, 0U, 3U >
 Bits 2:0, RW: the manual's LS_OCP_DEGLITCH_UVW.
 
using tmc9660::fields::mcc_gdrv_ocp_y2::HsOcpThresY2 = detail::Field< uint32_t, 24U, 4U >
 Bits 27:24, RW: the manual's HS_OCP_THRES_Y2.
 
using tmc9660::fields::mcc_gdrv_ocp_y2::HsOcpBlankingY2 = detail::Field< uint32_t, 20U, 3U >
 Bits 22:20, RW: the manual's HS_OCP_BLANKING_Y2.
 
using tmc9660::fields::mcc_gdrv_ocp_y2::HsOcpDeglitchY2 = detail::Field< uint32_t, 16U, 3U >
 Bits 18:16, RW: the manual's HS_OCP_DEGLITCH_Y2.
 
using tmc9660::fields::mcc_gdrv_ocp_y2::LsOcpUseVdsY2 = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's LS_OCP_USE_VDS_Y2.
 
using tmc9660::fields::mcc_gdrv_ocp_y2::LsOcpThresY2 = detail::Field< uint32_t, 8U, 4U >
 Bits 11:8, RW: the manual's LS_OCP_THRES_Y2.
 
using tmc9660::fields::mcc_gdrv_ocp_y2::LsOcpBlankingY2 = detail::Field< uint32_t, 4U, 3U >
 Bits 6:4, RW: the manual's LS_OCP_BLANKING_Y2.
 
using tmc9660::fields::mcc_gdrv_ocp_y2::LsOcpDeglitchY2 = detail::Field< uint32_t, 0U, 3U >
 Bits 2:0, RW: the manual's LS_OCP_DEGLITCH_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::VsUvloProt = detail::Field< uint32_t, 31U, 1U >
 Bits 31:31, RW: the manual's VS_UVLO_PROT.
 
using tmc9660::fields::mcc_gdrv_prot_en::VdrvUvloProt = detail::Field< uint32_t, 29U, 1U >
 Bits 29:29, RW: the manual's VDRV_UVLO_PROT.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOnShortProtY2 = detail::Field< uint32_t, 27U, 1U >
 Bits 27:27, RW: the manual's HS_VGS_ON_SHORT_PROT_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOnShortProtW = detail::Field< uint32_t, 26U, 1U >
 Bits 26:26, RW: the manual's HS_VGS_ON_SHORT_PROT_W.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOnShortProtV = detail::Field< uint32_t, 25U, 1U >
 Bits 25:25, RW: the manual's HS_VGS_ON_SHORT_PROT_V.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOnShortProtU = detail::Field< uint32_t, 24U, 1U >
 Bits 24:24, RW: the manual's HS_VGS_ON_SHORT_PROT_U.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOffShortProtY2 = detail::Field< uint32_t, 23U, 1U >
 Bits 23:23, RW: the manual's HS_VGS_OFF_SHORT_PROT_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOffShortProtW = detail::Field< uint32_t, 22U, 1U >
 Bits 22:22, RW: the manual's HS_VGS_OFF_SHORT_PROT_W.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOffShortProtV = detail::Field< uint32_t, 21U, 1U >
 Bits 21:21, RW: the manual's HS_VGS_OFF_SHORT_PROT_V.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsVgsOffShortProtU = detail::Field< uint32_t, 20U, 1U >
 Bits 20:20, RW: the manual's HS_VGS_OFF_SHORT_PROT_U.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsShortProtY2 = detail::Field< uint32_t, 19U, 1U >
 Bits 19:19, RW: the manual's HS_SHORT_PROT_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsShortProtW = detail::Field< uint32_t, 18U, 1U >
 Bits 18:18, RW: the manual's HS_SHORT_PROT_W.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsShortProtV = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW: the manual's HS_SHORT_PROT_V.
 
using tmc9660::fields::mcc_gdrv_prot_en::HsShortProtU = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, RW: the manual's HS_SHORT_PROT_U.
 
using tmc9660::fields::mcc_gdrv_prot_en::BstUvloProtY2 = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's BST_UVLO_PROT_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::BstUvloProtW = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, RW: the manual's BST_UVLO_PROT_W.
 
using tmc9660::fields::mcc_gdrv_prot_en::BstUvloProtV = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, RW: the manual's BST_UVLO_PROT_V.
 
using tmc9660::fields::mcc_gdrv_prot_en::BstUvloProtU = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW: the manual's BST_UVLO_PROT_U.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOnShortProtY2 = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW: the manual's LS_VGS_ON_SHORT_PROT_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOnShortProtW = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW: the manual's LS_VGS_ON_SHORT_PROT_W.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOnShortProtV = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW: the manual's LS_VGS_ON_SHORT_PROT_V.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOnShortProtU = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW: the manual's LS_VGS_ON_SHORT_PROT_U.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOffShortProtY2 = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW: the manual's LS_VGS_OFF_SHORT_PROT_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOffShortProtW = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW: the manual's LS_VGS_OFF_SHORT_PROT_W.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOffShortProtV = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW: the manual's LS_VGS_OFF_SHORT_PROT_V.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsVgsOffShortProtU = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW: the manual's LS_VGS_OFF_SHORT_PROT_U.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsShortProtY2 = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's LS_SHORT_PROT_Y2.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsShortProtW = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's LS_SHORT_PROT_W.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsShortProtV = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's LS_SHORT_PROT_V.
 
using tmc9660::fields::mcc_gdrv_prot_en::LsShortProtU = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's LS_SHORT_PROT_U.
 
using tmc9660::fields::mcc_gdrv_status_en::VsUvloEn = detail::Field< uint32_t, 31U, 1U >
 Bits 31:31, RW: the manual's VS_UVLO_EN.
 
using tmc9660::fields::mcc_gdrv_status_en::VdrvUvlwrnEn = detail::Field< uint32_t, 30U, 1U >
 Bits 30:30, RW: the manual's VDRV_UVLWRN_EN.
 
using tmc9660::fields::mcc_gdrv_status_en::VdrvUvloEn = detail::Field< uint32_t, 29U, 1U >
 Bits 29:29, RW: the manual's VDRV_UVLO_EN.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOnShortEnY2 = detail::Field< uint32_t, 27U, 1U >
 Bits 27:27, RW: the manual's HS_VGS_ON_SHORT_EN_Y2.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOnShortEnW = detail::Field< uint32_t, 26U, 1U >
 Bits 26:26, RW: the manual's HS_VGS_ON_SHORT_EN_W.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOnShortEnV = detail::Field< uint32_t, 25U, 1U >
 Bits 25:25, RW: the manual's HS_VGS_ON_SHORT_EN_V.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOnShortEnU = detail::Field< uint32_t, 24U, 1U >
 Bits 24:24, RW: the manual's HS_VGS_ON_SHORT_EN_U.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOffShortEnY2 = detail::Field< uint32_t, 23U, 1U >
 Bits 23:23, RW: the manual's HS_VGS_OFF_SHORT_EN_Y2.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOffShortEnW = detail::Field< uint32_t, 22U, 1U >
 Bits 22:22, RW: the manual's HS_VGS_OFF_SHORT_EN_W.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOffShortEnV = detail::Field< uint32_t, 21U, 1U >
 Bits 21:21, RW: the manual's HS_VGS_OFF_SHORT_EN_V.
 
using tmc9660::fields::mcc_gdrv_status_en::HsVgsOffShortEnU = detail::Field< uint32_t, 20U, 1U >
 Bits 20:20, RW: the manual's HS_VGS_OFF_SHORT_EN_U.
 
using tmc9660::fields::mcc_gdrv_status_en::HsShortEnY2 = detail::Field< uint32_t, 19U, 1U >
 Bits 19:19, RW: the manual's HS_SHORT_EN_Y2.
 
using tmc9660::fields::mcc_gdrv_status_en::HsShortEnW = detail::Field< uint32_t, 18U, 1U >
 Bits 18:18, RW: the manual's HS_SHORT_EN_W.
 
using tmc9660::fields::mcc_gdrv_status_en::HsShortEnV = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW: the manual's HS_SHORT_EN_V.
 
using tmc9660::fields::mcc_gdrv_status_en::HsShortEnU = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, RW: the manual's HS_SHORT_EN_U.
 
using tmc9660::fields::mcc_gdrv_status_en::BstUvloEnY2 = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's BST_UVLO_EN_Y2.
 
using tmc9660::fields::mcc_gdrv_status_en::BstUvloEnW = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, RW: the manual's BST_UVLO_EN_W.
 
using tmc9660::fields::mcc_gdrv_status_en::BstUvloEnV = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, RW: the manual's BST_UVLO_EN_V.
 
using tmc9660::fields::mcc_gdrv_status_en::BstUvloEnU = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW: the manual's BST_UVLO_EN_U.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOnShortEnY2 = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW: the manual's LS_VGS_ON_SHORT_EN_Y2.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOnShortEnW = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW: the manual's LS_VGS_ON_SHORT_EN_W.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOnShortEnV = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW: the manual's LS_VGS_ON_SHORT_EN_V.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOnShortEnU = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW: the manual's LS_VGS_ON_SHORT_EN_U.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOffShortEnY2 = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW: the manual's LS_VGS_OFF_SHORT_EN_Y2.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOffShortEnW = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW: the manual's LS_VGS_OFF_SHORT_EN_W.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOffShortEnV = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW: the manual's LS_VGS_OFF_SHORT_EN_V.
 
using tmc9660::fields::mcc_gdrv_status_en::LsVgsOffShortEnU = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW: the manual's LS_VGS_OFF_SHORT_EN_U.
 
using tmc9660::fields::mcc_gdrv_status_en::LsShortEnY2 = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's LS_SHORT_EN_Y2.
 
using tmc9660::fields::mcc_gdrv_status_en::LsShortEnW = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's LS_SHORT_EN_W.
 
using tmc9660::fields::mcc_gdrv_status_en::LsShortEnV = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's LS_SHORT_EN_V.
 
using tmc9660::fields::mcc_gdrv_status_en::LsShortEnU = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's LS_SHORT_EN_U.
 
using tmc9660::fields::mcc_gdrv_status::VsUvlo = detail::Field< uint32_t, 31U, 1U >
 Bits 31:31, RW, W1C: the manual's VS_UVLO.
 
using tmc9660::fields::mcc_gdrv_status::VdrvUvlwrn = detail::Field< uint32_t, 30U, 1U >
 Bits 30:30, RW, W1C: the manual's VDRV_UVLWRN.
 
using tmc9660::fields::mcc_gdrv_status::VdrvUvlo = detail::Field< uint32_t, 29U, 1U >
 Bits 29:29, RW, W1C: the manual's VDRV_UVLO.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOnShortY2 = detail::Field< uint32_t, 27U, 1U >
 Bits 27:27, RW, W1C: the manual's HS_VGS_ON_SHORT_Y2.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOnShortW = detail::Field< uint32_t, 26U, 1U >
 Bits 26:26, RW, W1C: the manual's HS_VGS_ON_SHORT_W.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOnShortV = detail::Field< uint32_t, 25U, 1U >
 Bits 25:25, RW, W1C: the manual's HS_VGS_ON_SHORT_V.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOnShortU = detail::Field< uint32_t, 24U, 1U >
 Bits 24:24, RW, W1C: the manual's HS_VGS_ON_SHORT_U.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOffShortY2 = detail::Field< uint32_t, 23U, 1U >
 Bits 23:23, RW, W1C: the manual's HS_VGS_OFF_SHORT_Y2.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOffShortW = detail::Field< uint32_t, 22U, 1U >
 Bits 22:22, RW, W1C: the manual's HS_VGS_OFF_SHORT_W.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOffShortV = detail::Field< uint32_t, 21U, 1U >
 Bits 21:21, RW, W1C: the manual's HS_VGS_OFF_SHORT_V.
 
using tmc9660::fields::mcc_gdrv_status::HsVgsOffShortU = detail::Field< uint32_t, 20U, 1U >
 Bits 20:20, RW, W1C: the manual's HS_VGS_OFF_SHORT_U.
 
using tmc9660::fields::mcc_gdrv_status::HsShortY2 = detail::Field< uint32_t, 19U, 1U >
 Bits 19:19, RW, W1C: the manual's HS_SHORT_Y2.
 
using tmc9660::fields::mcc_gdrv_status::HsShortW = detail::Field< uint32_t, 18U, 1U >
 Bits 18:18, RW, W1C: the manual's HS_SHORT_W.
 
using tmc9660::fields::mcc_gdrv_status::HsShortV = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW, W1C: the manual's HS_SHORT_V.
 
using tmc9660::fields::mcc_gdrv_status::HsShortU = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, RW, W1C: the manual's HS_SHORT_U.
 
using tmc9660::fields::mcc_gdrv_status::BstUvloY2 = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW, W1C: the manual's BST_UVLO_Y2.
 
using tmc9660::fields::mcc_gdrv_status::BstUvloW = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, RW, W1C: the manual's BST_UVLO_W.
 
using tmc9660::fields::mcc_gdrv_status::BstUvloV = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, RW, W1C: the manual's BST_UVLO_V.
 
using tmc9660::fields::mcc_gdrv_status::BstUvloU = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW, W1C: the manual's BST_UVLO_U.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOnShortY2 = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW, W1C: the manual's LS_VGS_ON_SHORT_Y2.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOnShortW = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW, W1C: the manual's LS_VGS_ON_SHORT_W.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOnShortV = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW, W1C: the manual's LS_VGS_ON_SHORT_V.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOnShortU = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW, W1C: the manual's LS_VGS_ON_SHORT_U.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOffShortY2 = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW, W1C: the manual's LS_VGS_OFF_SHORT_Y2.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOffShortW = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW, W1C: the manual's LS_VGS_OFF_SHORT_W.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOffShortV = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW, W1C: the manual's LS_VGS_OFF_SHORT_V.
 
using tmc9660::fields::mcc_gdrv_status::LsVgsOffShortU = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW, W1C: the manual's LS_VGS_OFF_SHORT_U.
 
using tmc9660::fields::mcc_gdrv_status::LsShortY2 = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW, W1C: the manual's LS_SHORT_Y2.
 
using tmc9660::fields::mcc_gdrv_status::LsShortW = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW, W1C: the manual's LS_SHORT_W.
 
using tmc9660::fields::mcc_gdrv_status::LsShortV = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW, W1C: the manual's LS_SHORT_V.
 
using tmc9660::fields::mcc_gdrv_status::LsShortU = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW, W1C: the manual's LS_SHORT_U.
 
using tmc9660::fields::mcc_gdrv_fault::VsUvloSts = detail::Field< uint32_t, 31U, 1U >
 Bits 31:31, R: the manual's VS_UVLO_STS.
 
using tmc9660::fields::mcc_gdrv_fault::VdrvUvlwrnSts = detail::Field< uint32_t, 30U, 1U >
 Bits 30:30, R: the manual's VDRV_UVLWRN_STS.
 
using tmc9660::fields::mcc_gdrv_fault::VdrvUvloSts = detail::Field< uint32_t, 29U, 1U >
 Bits 29:29, R: the manual's VDRV_UVLO_STS.
 
using tmc9660::fields::mcc_gdrv_fault::HsFaultActiveY2 = detail::Field< uint32_t, 19U, 1U >
 Bits 19:19, RW, W1C: the manual's HS_FAULT_ACTIVE_Y2.
 
using tmc9660::fields::mcc_gdrv_fault::HsFaultActiveW = detail::Field< uint32_t, 18U, 1U >
 Bits 18:18, RW, W1C: the manual's HS_FAULT_ACTIVE_W.
 
using tmc9660::fields::mcc_gdrv_fault::HsFaultActiveV = detail::Field< uint32_t, 17U, 1U >
 Bits 17:17, RW, W1C: the manual's HS_FAULT_ACTIVE_V.
 
using tmc9660::fields::mcc_gdrv_fault::HsFaultActiveU = detail::Field< uint32_t, 16U, 1U >
 Bits 16:16, RW, W1C: the manual's HS_FAULT_ACTIVE_U.
 
using tmc9660::fields::mcc_gdrv_fault::BstUvloStsY2 = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, R: the manual's BST_UVLO_STS_Y2.
 
using tmc9660::fields::mcc_gdrv_fault::BstUvloStsW = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, R: the manual's BST_UVLO_STS_W.
 
using tmc9660::fields::mcc_gdrv_fault::BstUvloStsV = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, R: the manual's BST_UVLO_STS_V.
 
using tmc9660::fields::mcc_gdrv_fault::BstUvloStsU = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, R: the manual's BST_UVLO_STS_U.
 
using tmc9660::fields::mcc_gdrv_fault::LsFaultActiveY2 = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW, W1C: the manual's LS_FAULT_ACTIVE_Y2.
 
using tmc9660::fields::mcc_gdrv_fault::LsFaultActiveW = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW, W1C: the manual's LS_FAULT_ACTIVE_W.
 
using tmc9660::fields::mcc_gdrv_fault::LsFaultActiveV = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW, W1C: the manual's LS_FAULT_ACTIVE_V.
 
using tmc9660::fields::mcc_gdrv_fault::LsFaultActiveU = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW, W1C: the manual's LS_FAULT_ACTIVE_U.
 
using tmc9660::fields::mcc_adc_i1_i0_ext::I1 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's I1.
 
using tmc9660::fields::mcc_adc_i1_i0_ext::I0 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's I0.
 
using tmc9660::fields::mcc_adc_i2_ext::I2 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's I2.
 
using tmc9660::fields::mcc_pwm_vx2_ux1_ext::Vx2 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, unsigned: the manual's VX2.
 
using tmc9660::fields::mcc_pwm_vx2_ux1_ext::Ux1 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's UX1.
 
using tmc9660::fields::mcc_pwm_y2_wy1_ext::Y2 = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, unsigned: the manual's Y2.
 
using tmc9660::fields::mcc_pwm_y2_wy1_ext::Wy1 = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's WY1.
 
using tmc9660::fields::mcc_pwm_ext_y2_alt::PwmExtY2Alt = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, unsigned: the manual's PWM_EXT_Y2_ALT.
 
using tmc9660::fields::mcc_voltage_ext::Uq = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's UQ.
 
using tmc9660::fields::mcc_voltage_ext::Ud = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's UD.
 
using tmc9660::fields::mcc_phi_ext::PhiMExt = detail::Field< uint32_t, 16U, 16U >
 Bits 31:16, RW, signed: the manual's PHI_M_EXT.
 
using tmc9660::fields::mcc_phi_ext::PhiEExt = detail::Field< uint32_t, 0U, 16U >
 Bits 15:0, RW, signed: the manual's PHI_E_EXT.
 
using tmc9660::fields::adc_src_config::Adc3Mux2Detour = detail::Field< uint32_t, 31U, 1U >
 Bits 31:31, RW: the manual's ADC3_MUX2_DETOUR.
 
using tmc9660::fields::adc_src_config::Adc3Mux2Cfg = detail::Field< uint32_t, 28U, 2U >
 Bits 29:28, RW: the manual's ADC3_MUX2_CFG.
 
using tmc9660::fields::adc_src_config::Adc3Mux1Cfg = detail::Field< uint32_t, 26U, 2U >
 Bits 27:26, RW: the manual's ADC3_MUX1_CFG.
 
using tmc9660::fields::adc_src_config::Adc3Mux0Cfg = detail::Field< uint32_t, 24U, 2U >
 Bits 25:24, RW: the manual's ADC3_MUX0_CFG.
 
using tmc9660::fields::adc_src_config::Adc2Mux2Detour = detail::Field< uint32_t, 23U, 1U >
 Bits 23:23, RW: the manual's ADC2_MUX2_DETOUR.
 
using tmc9660::fields::adc_src_config::Adc2Mux3Dis = detail::Field< uint32_t, 22U, 1U >
 Bits 22:22, RW: the manual's ADC2_MUX3_DIS.
 
using tmc9660::fields::adc_src_config::Adc2Mux2Cfg = detail::Field< uint32_t, 20U, 2U >
 Bits 21:20, RW: the manual's ADC2_MUX2_CFG.
 
using tmc9660::fields::adc_src_config::Adc2Mux1Cfg = detail::Field< uint32_t, 18U, 2U >
 Bits 19:18, RW: the manual's ADC2_MUX1_CFG.
 
using tmc9660::fields::adc_src_config::Adc2Mux0Cfg = detail::Field< uint32_t, 16U, 2U >
 Bits 17:16, RW: the manual's ADC2_MUX0_CFG.
 
using tmc9660::fields::adc_src_config::Adc1Mux2Detour = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's ADC1_MUX2_DETOUR.
 
using tmc9660::fields::adc_src_config::Adc1Mux2Cfg = detail::Field< uint32_t, 12U, 2U >
 Bits 13:12, RW: the manual's ADC1_MUX2_CFG.
 
using tmc9660::fields::adc_src_config::Adc1Mux1Cfg = detail::Field< uint32_t, 10U, 2U >
 Bits 11:10, RW: the manual's ADC1_MUX1_CFG.
 
using tmc9660::fields::adc_src_config::Adc1Mux0Cfg = detail::Field< uint32_t, 8U, 2U >
 Bits 9:8, RW: the manual's ADC1_MUX0_CFG.
 
using tmc9660::fields::adc_src_config::Adc0Mux2Detour = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW: the manual's ADC0_MUX2_DETOUR.
 
using tmc9660::fields::adc_src_config::Adc0Mux3Dis = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW: the manual's ADC0_MUX3_DIS.
 
using tmc9660::fields::adc_src_config::Adc0Mux2Cfg = detail::Field< uint32_t, 4U, 2U >
 Bits 5:4, RW: the manual's ADC0_MUX2_CFG.
 
using tmc9660::fields::adc_src_config::Adc0Mux1Cfg = detail::Field< uint32_t, 2U, 2U >
 Bits 3:2, RW: the manual's ADC0_MUX1_CFG.
 
using tmc9660::fields::adc_src_config::Adc0Mux0Cfg = detail::Field< uint32_t, 0U, 2U >
 Bits 1:0, RW: the manual's ADC0_MUX0_CFG.
 
using tmc9660::fields::adc_setup::AdcShiftSample = detail::Field< uint32_t, 16U, 4U >
 Bits 19:16, RW: the manual's ADC_SHIFT_SAMPLE.
 
using tmc9660::fields::adc_status::Adc3MuxseqFail = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, R: the manual's ADC3_MUXSEQ_FAIL.
 
using tmc9660::fields::adc_status::Adc2MuxseqFail = detail::Field< uint32_t, 14U, 1U >
 Bits 14:14, R: the manual's ADC2_MUXSEQ_FAIL.
 
using tmc9660::fields::adc_status::Adc1MuxseqFail = detail::Field< uint32_t, 13U, 1U >
 Bits 13:13, R: the manual's ADC1_MUXSEQ_FAIL.
 
using tmc9660::fields::adc_status::Adc0MuxseqFail = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, R: the manual's ADC0_MUXSEQ_FAIL.
 
using tmc9660::fields::adc_status::Adc3WtchdgFail = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, R: the manual's ADC3_WTCHDG_FAIL.
 
using tmc9660::fields::adc_status::Adc2WtchdgFail = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, R: the manual's ADC2_WTCHDG_FAIL.
 
using tmc9660::fields::adc_status::Adc1WtchdgFail = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, R: the manual's ADC1_WTCHDG_FAIL.
 
using tmc9660::fields::adc_status::Adc0WtchdgFail = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, R: the manual's ADC0_WTCHDG_FAIL.
 
using tmc9660::fields::adc_status::RdyAdc3 = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, R: the manual's RDY_ADC_3.
 
using tmc9660::fields::adc_status::RdyAdc2 = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, R: the manual's RDY_ADC_2.
 
using tmc9660::fields::adc_status::RdyAdc1 = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, R: the manual's RDY_ADC_1.
 
using tmc9660::fields::adc_status::RdyAdc0 = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, R: the manual's RDY_ADC_0.
 
using tmc9660::fields::csa_setup::CsaAzFltlngthExp = detail::Field< uint32_t, 16U, 4U >
 Bits 19:16, RW: the manual's CSA_AZ_FLTLNGTH_EXP.
 
using tmc9660::fields::csa_setup::Csa3Filt = detail::Field< uint32_t, 14U, 2U >
 Bits 15:14, RW: the manual's CSA3_FILT.
 
using tmc9660::fields::csa_setup::Csa012Filt = detail::Field< uint32_t, 12U, 2U >
 Bits 13:12, RW: the manual's CSA012_FILT.
 
using tmc9660::fields::csa_setup::Csa3Bypass = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW: the manual's CSA3_BYPASS.
 
using tmc9660::fields::csa_setup::Csa3Gain = detail::Field< uint32_t, 8U, 2U >
 Bits 9:8, RW: the manual's CSA3_GAIN.
 
using tmc9660::fields::csa_setup::Csa012Bypass = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW: the manual's CSA012_BYPASS.
 
using tmc9660::fields::csa_setup::Csa012Gain = detail::Field< uint32_t, 4U, 2U >
 Bits 5:4, RW: the manual's CSA012_GAIN.
 
using tmc9660::fields::csa_setup::Csa3En = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's CSA3_EN.
 
using tmc9660::fields::csa_setup::Csa2En = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's CSA2_EN.
 
using tmc9660::fields::csa_setup::Csa1En = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's CSA1_EN.
 
using tmc9660::fields::csa_setup::Csa0En = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's CSA0_EN.
 
using tmc9660::fields::fault_sts::Ldo2Ready = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, R: the manual's LDO2_READY.
 
using tmc9660::fields::fault_sts::Ldo1Ready = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, R: the manual's LDO1_READY.
 
using tmc9660::fields::fault_sts::VccioUvlo = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, R: the manual's VCCIO_UVLO.
 
using tmc9660::fields::fault_sts::VddaUvlo = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, R: the manual's VDDA_UVLO.
 
using tmc9660::fields::fault_sts::VddUvlo = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, R: the manual's VDD_UVLO.
 
using tmc9660::fields::fault_sts::VsaUvlo = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, R: the manual's VSA_UVLO.
 
using tmc9660::fields::fault_sts::ChgpShort = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, R: the manual's CHGP_SHORT.
 
using tmc9660::fields::fault_sts::ChgpOk = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, R: the manual's CHGP_OK.
 
using tmc9660::fields::fault_sts::Ldoext2Short = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, R: the manual's LDOEXT2_SHORT.
 
using tmc9660::fields::fault_sts::Ldoext1Short = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, R: the manual's LDOEXT1_SHORT.
 
using tmc9660::fields::fault_sts::LdoextTsd = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, R: the manual's LDOEXT_TSD.
 
using tmc9660::fields::fault_sts::BckShort = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, R: the manual's BCK_SHORT.
 
using tmc9660::fields::fault_sts::BckUvlo = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, R: the manual's BCK_UVLO.
 
using tmc9660::fields::fault_r_int::UcFault = detail::Field< uint32_t, 15U, 1U >
 Bits 15:15, RW: the manual's UC_FAULT.
 
using tmc9660::fields::fault_r_int::Ldo2ReadyReLtc = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW, W1C: the manual's LDO2_READY_RE_LTC.
 
using tmc9660::fields::fault_r_int::Ldo1ReadyReLtc = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW, W1C: the manual's LDO1_READY_RE_LTC.
 
using tmc9660::fields::fault_r_int::VccioUvloLtc = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW, W1C: the manual's VCCIO_UVLO_LTC.
 
using tmc9660::fields::fault_r_int::VddaUvloLtc = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW, W1C: the manual's VDDA_UVLO_LTC.
 
using tmc9660::fields::fault_r_int::VddUvloLtc = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW, W1C: the manual's VDD_UVLO_LTC.
 
using tmc9660::fields::fault_r_int::VsaUvloLtc = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW, W1C: the manual's VSA_UVLO_LTC.
 
using tmc9660::fields::fault_r_int::ChgpShortLtc = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW, W1C: the manual's CHGP_SHORT_LTC.
 
using tmc9660::fields::fault_r_int::ChgpOkLtc = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW, W1C: the manual's CHGP_OK_LTC.
 
using tmc9660::fields::fault_r_int::Ldoext2ShortLtc = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW, W1C: the manual's LDOEXT2_SHORT_LTC.
 
using tmc9660::fields::fault_r_int::Ldoext1ShortLtc = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW, W1C: the manual's LDOEXT1_SHORT_LTC.
 
using tmc9660::fields::fault_r_int::LdoextTsdLtc = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW, W1C: the manual's LDOEXT_TSD_LTC.
 
using tmc9660::fields::fault_r_int::BckShortReLtc = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW, W1C: the manual's BCK_SHORT_RE_LTC.
 
using tmc9660::fields::fault_r_int::BckUvloLtc = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW, W1C: the manual's BCK_UVLO_LTC.
 
using tmc9660::fields::fault_r_ena_f::Ldo2ReadyReEnaF = detail::Field< uint32_t, 12U, 1U >
 Bits 12:12, RW: the manual's LDO2_READY_RE_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::Ldo1ReadyReEnaF = detail::Field< uint32_t, 11U, 1U >
 Bits 11:11, RW: the manual's LDO1_READY_RE_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::VccioUvloEnaF = detail::Field< uint32_t, 10U, 1U >
 Bits 10:10, RW: the manual's VCCIO_UVLO_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::VddaUvloEnaF = detail::Field< uint32_t, 9U, 1U >
 Bits 9:9, RW: the manual's VDDA_UVLO_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::VddUvloEnaF = detail::Field< uint32_t, 8U, 1U >
 Bits 8:8, RW: the manual's VDD_UVLO_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::VsaUvloEnaF = detail::Field< uint32_t, 7U, 1U >
 Bits 7:7, RW: the manual's VSA_UVLO_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::ChgpShortEnaF = detail::Field< uint32_t, 6U, 1U >
 Bits 6:6, RW: the manual's CHGP_SHORT_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::ChgpOkEnaF = detail::Field< uint32_t, 5U, 1U >
 Bits 5:5, RW: the manual's CHGP_OK_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::Ldoext2ShortEnaF = detail::Field< uint32_t, 4U, 1U >
 Bits 4:4, RW: the manual's LDOEXT2_SHORT_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::Ldoext1ShortEnaF = detail::Field< uint32_t, 3U, 1U >
 Bits 3:3, RW: the manual's LDOEXT1_SHORT_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::LdoextTsdEnaF = detail::Field< uint32_t, 2U, 1U >
 Bits 2:2, RW: the manual's LDOEXT_TSD_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::BckShortReEnaF = detail::Field< uint32_t, 1U, 1U >
 Bits 1:1, RW: the manual's BCK_SHORT_RE_ENA_F.
 
using tmc9660::fields::fault_r_ena_f::BckUvloEnaF = detail::Field< uint32_t, 0U, 1U >
 Bits 0:0, RW: the manual's BCK_UVLO_ENA_F.
 

Enumerations

enum class  tmc9660::Block : uint8_t { tmc9660::Mcc = 0 , tmc9660::Adc = 1 , tmc9660::SysCtrl = 2 , tmc9660::RamDebug = 31 }
 Register blocks (Table 5 of the register manual). More...
 

Functions

constexpr const RegInfo * tmc9660::FindRegister (RegAddr addr) noexcept
 The map row of a register.
 

Variables

constexpr RegAddr tmc9660::regs::MCC_INFO_CHIP {.block = Block::Mcc, .offset = 0x000}
 Chip ID.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I1_I0_RAW {.block = Block::Mcc, .offset = 0x020}
 Raw phase currents I1, I0.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I3_I2_RAW {.block = Block::Mcc, .offset = 0x021}
 Raw phase currents I3, I2.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_U1_U0_RAW {.block = Block::Mcc, .offset = 0x022}
 Measured phase voltages U1 and U0.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_U3_U2_RAW {.block = Block::Mcc, .offset = 0x023}
 Measured phase voltage.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_TEMP_VM_RAW {.block = Block::Mcc, .offset = 0x024}
 Raw Die temperature voltage and supply voltage monitoring value.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_AIN1_AIN0_RAW {.block = Block::Mcc, .offset = 0x025}
 Raw analog values AIN1 and AIN0.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_AIN3_AIN2_RAW {.block = Block::Mcc, .offset = 0x026}
 Raw analog values AIN3 and AIN2.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I_GEN_CONFIG {.block = Block::Mcc, .offset = 0x040}
 General configuration setup of the current ADCs.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I0_CONFIG {.block = Block::Mcc, .offset = 0x041}
 Current ADC channel 0 offset and scaling values.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I1_CONFIG {.block = Block::Mcc, .offset = 0x042}
 Current ADC channel 1 offset and scaling values.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I2_CONFIG {.block = Block::Mcc, .offset = 0x043}
 Current ADC channel 2 offset and scaling values.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I3_CONFIG {.block = Block::Mcc, .offset = 0x044}
 Current ADC channel 3 offset and scaling values.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I1_I0_SCALED {.block = Block::Mcc, .offset = 0x045}
 Phase current I1, I0; after applying scaling and offset.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I3_I2_SCALED {.block = Block::Mcc, .offset = 0x046}
 Phase current I3, I2; after applying scaling and offset.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_IWY_IUX {.block = Block::Mcc, .offset = 0x047}
 Scaled current ADC value including signed added offset as input for the FOC.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_IV {.block = Block::Mcc, .offset = 0x048}
 Scaled current ADC value including signed added offset as input for the FOC.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_STATUS {.block = Block::Mcc, .offset = 0x049}
 ADC status flags.
 
constexpr RegAddr tmc9660::regs::MCC_MOTOR_CONFIG {.block = Block::Mcc, .offset = 0x060}
 Motor type configuration and number of pole pairs.
 
constexpr RegAddr tmc9660::regs::MCC_MOTION_CONFIG {.block = Block::Mcc, .offset = 0x061}
 Register for selection of ramp mode, motion mode and controller feedforward.
 
constexpr RegAddr tmc9660::regs::MCC_PHI_E_SELECTION {.block = Block::Mcc, .offset = 0x062}
 Selection of phi resp.
 
constexpr RegAddr tmc9660::regs::MCC_PHI_E {.block = Block::Mcc, .offset = 0x063}
 Angle used for the inner FOC loop.
 
constexpr RegAddr tmc9660::regs::MCC_PWM_CONFIG {.block = Block::Mcc, .offset = 0x080}
 PWM Configuration: Chopper Mode, Enable Space Vector, Enable Bridge, Y2 Source, Offset.
 
constexpr RegAddr tmc9660::regs::MCC_PWM_MAXCNT {.block = Block::Mcc, .offset = 0x081}
 PWM counter maximum length register PWM_MAXCNT controls the PWM frequency.
 
constexpr RegAddr tmc9660::regs::MCC_PWM_SWITCH_LIMIT {.block = Block::Mcc, .offset = 0x083}
 
constexpr RegAddr tmc9660::regs::MCC_ABN_PHI_E_PHI_M {.block = Block::Mcc, .offset = 0x0a0}
 ABN Decoder electrical angle PHI_E and mechanical angle PHI_M.
 
constexpr RegAddr tmc9660::regs::MCC_ABN_MODE {.block = Block::Mcc, .offset = 0x0a1}
 ABN decoder configuration.
 
constexpr RegAddr tmc9660::regs::MCC_ABN_CPR {.block = Block::Mcc, .offset = 0x0a2}
 
constexpr RegAddr tmc9660::regs::MCC_ABN_CPR_INV {.block = Block::Mcc, .offset = 0x0a3}
 2^32 divided by decoder counts per revolution.
 
constexpr RegAddr tmc9660::regs::MCC_ABN_COUNT {.block = Block::Mcc, .offset = 0x0a4}
 Raw decoder count.
 
constexpr RegAddr tmc9660::regs::MCC_ABN_COUNT_N {.block = Block::Mcc, .offset = 0x0a5}
 ABN_COUNT latched on N pulse, when N pulse clears ABN_COUNT then ABN_COUNT_N is also 0.
 
constexpr RegAddr tmc9660::regs::MCC_ABN_PHI_E_OFFSET {.block = Block::Mcc, .offset = 0x0a6}
 Offset for ABN_PHI_E.
 
constexpr RegAddr tmc9660::regs::MCC_HALL_MODE {.block = Block::Mcc, .offset = 0x0c0}
 Hall decoder configuration.
 
constexpr RegAddr tmc9660::regs::MCC_HALL_DPHI_MAX {.block = Block::Mcc, .offset = 0x0c1}
 Maximum dx for extrapolation (default for digital hall: (2^16)/6).
 
constexpr RegAddr tmc9660::regs::MCC_HALL_PHI_E_OFFSET {.block = Block::Mcc, .offset = 0x0c2}
 Offset for electrical angle hall_phi_e of hall decoder.
 
constexpr RegAddr tmc9660::regs::MCC_HALL_COUNT {.block = Block::Mcc, .offset = 0x0c3}
 Count of passed hall states.
 
constexpr RegAddr tmc9660::regs::MCC_HALL_PHI_E_EXTRAPOLATED_PHI_E {.block = Block::Mcc, .offset = 0x0c4}
 Hall decoder electrical angle PHI_E.
 
constexpr RegAddr tmc9660::regs::MCC_HALL_POSITION_060_POSITION_000 {.block = Block::Mcc, .offset = 0x0c5}
 Position of the hall sensor.
 
constexpr RegAddr tmc9660::regs::MCC_HALL_POSITION_180_POSITION_120 {.block = Block::Mcc, .offset = 0x0c6}
 Position of the hall sensor.
 
constexpr RegAddr tmc9660::regs::MCC_HALL_POSITION_300_POSITION_240 {.block = Block::Mcc, .offset = 0x0c7}
 Position of the hall sensor.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_V_A_1 {.block = Block::Mcc, .offset = 0x0e0}
 Biquad velocity filter coefficient A_1.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_V_A_2 {.block = Block::Mcc, .offset = 0x0e1}
 Biquad velocity filter coefficient A_2.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_V_B_0 {.block = Block::Mcc, .offset = 0x0e2}
 Biquad velocity filter coefficient B_0.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_V_B_1 {.block = Block::Mcc, .offset = 0x0e3}
 Biquad velocity filter coefficient B_1.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_V_B_2 {.block = Block::Mcc, .offset = 0x0e4}
 Biquad velocity filter coefficient B_2.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_V_ENABLE {.block = Block::Mcc, .offset = 0x0e5}
 Biquad velocity filter enable.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_T_A_1 {.block = Block::Mcc, .offset = 0x0e6}
 Biquad torque filter coefficient A_1.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_T_A_2 {.block = Block::Mcc, .offset = 0x0e7}
 Biquad torque filter coefficient A_2.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_T_B_0 {.block = Block::Mcc, .offset = 0x0e8}
 Biquad torque filter coefficient B_0.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_T_B_1 {.block = Block::Mcc, .offset = 0x0e9}
 Biquad torque filter coefficient B_1.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_T_B_2 {.block = Block::Mcc, .offset = 0x0ea}
 Biquad torque filter coefficient B_2.
 
constexpr RegAddr tmc9660::regs::MCC_BIQUAD_T_ENABLE {.block = Block::Mcc, .offset = 0x0eb}
 Biquad torque filter enable.
 
constexpr RegAddr tmc9660::regs::MCC_VELOCITY_CONFIG {.block = Block::Mcc, .offset = 0x100}
 Velocity meter configuration.
 
constexpr RegAddr tmc9660::regs::MCC_VELOCITY_SCALING {.block = Block::Mcc, .offset = 0x101}
 Scaling factor for velocity meter output.
 
constexpr RegAddr tmc9660::regs::MCC_V_MIN_POS_DEV_TIME_COUNTER_LIMIT {.block = Block::Mcc, .offset = 0x102}
 Velocity meter configuration.
 
constexpr RegAddr tmc9660::regs::MCC_MAX_VEL_DEVIATION {.block = Block::Mcc, .offset = 0x103}
 Velocity deviation to generate tracking error flag.
 
constexpr RegAddr tmc9660::regs::MCC_POSITION_CONFIG {.block = Block::Mcc, .offset = 0x120}
 Position configuration.
 
constexpr RegAddr tmc9660::regs::MCC_MAX_POS_DEVIATION {.block = Block::Mcc, .offset = 0x121}
 Absolute position deviation to generate tracking error flag.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_STATUS {.block = Block::Mcc, .offset = 0x140}
 Ramp status and switch event status flags.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_A1 {.block = Block::Mcc, .offset = 0x141}
 First acceleration value during EigthPoint ramp mode.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_A2 {.block = Block::Mcc, .offset = 0x142}
 Second acceleration value during EigthPoint ramp mode.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_A_MAX {.block = Block::Mcc, .offset = 0x143}
 Maximum acceleration value in top part of EigthPoint ramp.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_D1 {.block = Block::Mcc, .offset = 0x144}
 Lower deceleration value during EigthPoint ramp mode.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_D2 {.block = Block::Mcc, .offset = 0x145}
 Higher deceleration value in EigthPoint ramp.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_D_MAX {.block = Block::Mcc, .offset = 0x146}
 Deceleration in top part of EightPoint ramp.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_V_START {.block = Block::Mcc, .offset = 0x147}
 First velocity value during EigthPoint ramp mode.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_V1 {.block = Block::Mcc, .offset = 0x148}
 First velocity value for ac-/deceleration value switching during EigthPoint ramp mode.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_V2 {.block = Block::Mcc, .offset = 0x149}
 Second velocity value for ac-/deceleration value switching during EigthPoint ramp mode.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_V_STOP {.block = Block::Mcc, .offset = 0x14a}
 Stop Velocity in EightPoint Ramp.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_V_MAX {.block = Block::Mcc, .offset = 0x14b}
 Maximum velocity value for positioning in EightPoint ramp.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_V_TARGET {.block = Block::Mcc, .offset = 0x14c}
 Target velocity value in EightPoint ramp.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_SWITCH_MODE {.block = Block::Mcc, .offset = 0x14d}
 Ramper mode configuration bits.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_TIME_CONFIG {.block = Block::Mcc, .offset = 0x14e}
 Ramper timing configuration.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_A_ACTUAL {.block = Block::Mcc, .offset = 0x14f}
 Actual ramp acceleration value.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_X_ACTUAL {.block = Block::Mcc, .offset = 0x150}
 Actual multi-turn position of ramp controller.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_V_ACTUAL {.block = Block::Mcc, .offset = 0x151}
 Actual velocity of Ramp controller output.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_X_TARGET {.block = Block::Mcc, .offset = 0x152}
 Multi-turn target position of Ramp controller.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_PHI_E {.block = Block::Mcc, .offset = 0x153}
 PHI_E of ramp controller.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_PHI_E_OFFSET {.block = Block::Mcc, .offset = 0x154}
 Offset value for calculation of RAMPER_PHI_E.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_ACC_FF {.block = Block::Mcc, .offset = 0x155}
 Gain and shift factor for Acc. feedforward.
 
constexpr RegAddr tmc9660::regs::MCC_RAMPER_X_ACTUAL_LATCH {.block = Block::Mcc, .offset = 0x156}
 Latches RAMPER_X_ACTUAL on left or right switch or Encoder trigger.
 
constexpr RegAddr tmc9660::regs::MCC_POSITION_ACTUAL_LATCH {.block = Block::Mcc, .offset = 0x157}
 Latches PID_POSITION_ACTUAL on left or right switch or Encoder trigger.
 
constexpr RegAddr tmc9660::regs::MCC_PRBS_AMPLITUDE {.block = Block::Mcc, .offset = 0x160}
 Set the amplitude of the PRBS signal used by some settings of MCC_MOTION_CONFIG -> MOTION_MODE.
 
constexpr RegAddr tmc9660::regs::MCC_PRBS_DOWN_SAMPLING_RATIO {.block = Block::Mcc, .offset = 0x161}
 Set downsampling rate of PWM frequency to trigger new PRBS value generation.
 
constexpr RegAddr tmc9660::regs::MCC_PID_CONFIG {.block = Block::Mcc, .offset = 0x180}
 PI controller configuration.
 
constexpr RegAddr tmc9660::regs::MCC_PID_FLUX_COEFF {.block = Block::Mcc, .offset = 0x181}
 Configuration of the PI Flux controller gains.
 
constexpr RegAddr tmc9660::regs::MCC_PID_TORQUE_COEFF {.block = Block::Mcc, .offset = 0x182}
 Configuration of the PI Torque controller gains.
 
constexpr RegAddr tmc9660::regs::MCC_PID_FIELDWEAK_COEFF {.block = Block::Mcc, .offset = 0x183}
 Configuration of the PI Fieldweakening controller gains.
 
constexpr RegAddr tmc9660::regs::MCC_PID_U_S_MAX {.block = Block::Mcc, .offset = 0x184}
 Maximum voltage allowed for fieldweakening.
 
constexpr RegAddr tmc9660::regs::MCC_PID_VELOCITY_COEFF {.block = Block::Mcc, .offset = 0x185}
 Configuration of the PI Velocity controller gains.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_COEFF {.block = Block::Mcc, .offset = 0x186}
 Configuration of the PI Position controller gains.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_TOLERANCE {.block = Block::Mcc, .offset = 0x187}
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_TOLERANCE_DELAY {.block = Block::Mcc, .offset = 0x188}
 Number of PWM periods the abs(PID_POSITION_ERROR) must stay within PID_POSITION_TOLERANCE after.
 
constexpr RegAddr tmc9660::regs::MCC_PID_UQ_UD_LIMITS {.block = Block::Mcc, .offset = 0x189}
 Set maximum output voltage limit value.
 
constexpr RegAddr tmc9660::regs::MCC_PID_TORQUE_FLUX_LIMITS {.block = Block::Mcc, .offset = 0x18a}
 Set maximum target absolute current for torque and flux PI controller.
 
constexpr RegAddr tmc9660::regs::MCC_PID_VELOCITY_LIMIT {.block = Block::Mcc, .offset = 0x18b}
 Set maximum absolute velocity for velocity PI controller.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_LIMIT_LOW {.block = Block::Mcc, .offset = 0x18c}
 Set minimum target position for position PI controller.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_LIMIT_HIGH {.block = Block::Mcc, .offset = 0x18d}
 Set maximum target position for position PI controller.
 
constexpr RegAddr tmc9660::regs::MCC_PID_TORQUE_FLUX_TARGET {.block = Block::Mcc, .offset = 0x18e}
 PID target torque and target flux (for torque mode).
 
constexpr RegAddr tmc9660::regs::MCC_PID_TORQUE_FLUX_OFFSET {.block = Block::Mcc, .offset = 0x18f}
 PID torque and flux offset.
 
constexpr RegAddr tmc9660::regs::MCC_PID_VELOCITY_TARGET {.block = Block::Mcc, .offset = 0x190}
 PID Target velocity (for velocity mode).
 
constexpr RegAddr tmc9660::regs::MCC_PID_VELOCITY_OFFSET {.block = Block::Mcc, .offset = 0x191}
 PID velocity offset for feed forward control.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_TARGET {.block = Block::Mcc, .offset = 0x192}
 Target position register (for position mode).
 
constexpr RegAddr tmc9660::regs::MCC_PID_TORQUE_FLUX_ACTUAL {.block = Block::Mcc, .offset = 0x193}
 PID actual torque and flux.
 
constexpr RegAddr tmc9660::regs::MCC_PID_VELOCITY_ACTUAL {.block = Block::Mcc, .offset = 0x194}
 PID actual velocity.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_ACTUAL {.block = Block::Mcc, .offset = 0x195}
 PID actual position.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_ACTUAL_OFFSET {.block = Block::Mcc, .offset = 0x196}
 Offset for actual position.
 
constexpr RegAddr tmc9660::regs::MCC_PID_TORQUE_ERROR {.block = Block::Mcc, .offset = 0x197}
 PID torque error.
 
constexpr RegAddr tmc9660::regs::MCC_PID_FLUX_ERROR {.block = Block::Mcc, .offset = 0x198}
 PID flux error.
 
constexpr RegAddr tmc9660::regs::MCC_PID_VELOCITY_ERROR {.block = Block::Mcc, .offset = 0x199}
 PID velocity error.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_ERROR {.block = Block::Mcc, .offset = 0x19a}
 PID position error.
 
constexpr RegAddr tmc9660::regs::MCC_PID_TORQUE_INTEGRATOR {.block = Block::Mcc, .offset = 0x19b}
 PID torque Integrator.
 
constexpr RegAddr tmc9660::regs::MCC_PID_FLUX_INTEGRATOR {.block = Block::Mcc, .offset = 0x19c}
 PID flux Integrator.
 
constexpr RegAddr tmc9660::regs::MCC_PID_VELOCITY_INTEGRATOR {.block = Block::Mcc, .offset = 0x19d}
 PID velocity Integrator.
 
constexpr RegAddr tmc9660::regs::MCC_PID_POSITION_INTEGRATOR {.block = Block::Mcc, .offset = 0x19e}
 PID position Integrator.
 
constexpr RegAddr tmc9660::regs::MCC_PIDIN_TORQUE_FLUX_TARGET {.block = Block::Mcc, .offset = 0x1a0}
 PID target torque and target flux for readback.
 
constexpr RegAddr tmc9660::regs::MCC_PIDIN_VELOCITY_TARGET {.block = Block::Mcc, .offset = 0x1a1}
 PID target velocity for readback.
 
constexpr RegAddr tmc9660::regs::MCC_PIDIN_POSITION_TARGET {.block = Block::Mcc, .offset = 0x1a2}
 PID target position for readback.
 
constexpr RegAddr tmc9660::regs::MCC_PIDIN_TORQUE_FLUX_TARGET_LIMITED {.block = Block::Mcc, .offset = 0x1a3}
 PID target torque and target flux after PID_TORQUE_FLUX_LIMITS applied.
 
constexpr RegAddr tmc9660::regs::MCC_PIDIN_VELOCITY_TARGET_LIMITED {.block = Block::Mcc, .offset = 0x1a4}
 PID target velocity after PID_VELOCITY_LIMIT applied.
 
constexpr RegAddr tmc9660::regs::MCC_PIDIN_POSITION_TARGET_LIMITED {.block = Block::Mcc, .offset = 0x1a5}
 PID target position after PID_POSITION_LIMIT_LOW and PID_POSITION_LIMIT_HIGH applied.
 
constexpr RegAddr tmc9660::regs::MCC_FOC_IBETA_IALPHA {.block = Block::Mcc, .offset = 0x1a6}
 Interim result of the FOC, IALPHA, and IBETA term.
 
constexpr RegAddr tmc9660::regs::MCC_FOC_IQ_ID {.block = Block::Mcc, .offset = 0x1a7}
 Interim result of the FOC, ID, and IQ term.
 
constexpr RegAddr tmc9660::regs::MCC_FOC_UQ_UD {.block = Block::Mcc, .offset = 0x1a8}
 Interim result of the FOC, UD, and UQ term.
 
constexpr RegAddr tmc9660::regs::MCC_FOC_UQ_UD_LIMITED {.block = Block::Mcc, .offset = 0x1a9}
 Interim result of the FOC, UD, and UQ term.
 
constexpr RegAddr tmc9660::regs::MCC_FOC_UBETA_UALPHA {.block = Block::Mcc, .offset = 0x1aa}
 Interim result of the FOC, UALPHA, and UBETA term.
 
constexpr RegAddr tmc9660::regs::MCC_FOC_UWY_UUX {.block = Block::Mcc, .offset = 0x1ab}
 Interim result of the FOC, UUX, and UWY term.
 
constexpr RegAddr tmc9660::regs::MCC_FOC_UV {.block = Block::Mcc, .offset = 0x1ac}
 Interim result of the FOC, UV term.
 
constexpr RegAddr tmc9660::regs::MCC_PWM_VX2_UX1 {.block = Block::Mcc, .offset = 0x1ad}
 Interim result PWM duty cycle UX1 and VX2.
 
constexpr RegAddr tmc9660::regs::MCC_PWM_Y2_WY1 {.block = Block::Mcc, .offset = 0x1ae}
 Interim result PWM duty cycle WY1 and Y2.
 
constexpr RegAddr tmc9660::regs::MCC_VELOCITY_FRQ {.block = Block::Mcc, .offset = 0x1af}
 Actual velocity measured by fixed frequency sampling.
 
constexpr RegAddr tmc9660::regs::MCC_VELOCITY_PER {.block = Block::Mcc, .offset = 0x1b0}
 Actual velocity measured by period measurement.
 
constexpr RegAddr tmc9660::regs::MCC_U_S_ACTUAL_I_S_ACTUAL {.block = Block::Mcc, .offset = 0x1c0}
 Actual motor voltage and current.
 
constexpr RegAddr tmc9660::regs::MCC_P_MOTOR {.block = Block::Mcc, .offset = 0x1c1}
 Actual Power applied to motor (P = U×I).
 
constexpr RegAddr tmc9660::regs::MCC_INPUTS_RAW {.block = Block::Mcc, .offset = 0x1c2}
 
constexpr RegAddr tmc9660::regs::MCC_OUTPUTS_RAW {.block = Block::Mcc, .offset = 0x1c3}
 Raw output signals for each PWM channel high- and low-side.
 
constexpr RegAddr tmc9660::regs::MCC_STATUS_FLAGS {.block = Block::Mcc, .offset = 0x1c4}
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_HW {.block = Block::Mcc, .offset = 0x1e3}
 Controls the general gate driver setup.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_CFG {.block = Block::Mcc, .offset = 0x1e4}
 Controls the gate driver behavior and current settings.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_TIMING {.block = Block::Mcc, .offset = 0x1e9}
 Sets the T_DRIVE sink and source times for all channels.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_BBM {.block = Block::Mcc, .offset = 0x1ea}
 Controls the BBM_L and BBM_H times for all channels.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_PROT {.block = Block::Mcc, .offset = 0x1eb}
 Contains the general and VGS related protection settings.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_OCP_UVW {.block = Block::Mcc, .offset = 0x1ec}
 Configures the overcurrent protection for phases U, V and W.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_OCP_Y2 {.block = Block::Mcc, .offset = 0x1ed}
 Configures the overcurrent protection for phase Y2.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_PROT_EN {.block = Block::Mcc, .offset = 0x1ee}
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_STATUS_EN {.block = Block::Mcc, .offset = 0x1ef}
 Enables the reporting of the different fault events.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_STATUS {.block = Block::Mcc, .offset = 0x1f0}
 Contains the status of the different fault events.
 
constexpr RegAddr tmc9660::regs::MCC_GDRV_FAULT {.block = Block::Mcc, .offset = 0x1f1}
 Contains the status of the different fault events.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I1_I0_EXT {.block = Block::Mcc, .offset = 0x200}
 External writable ADC value for phase I1, I0.
 
constexpr RegAddr tmc9660::regs::MCC_ADC_I2_EXT {.block = Block::Mcc, .offset = 0x201}
 
constexpr RegAddr tmc9660::regs::MCC_PWM_VX2_UX1_EXT {.block = Block::Mcc, .offset = 0x202}
 External writable PWM value.
 
constexpr RegAddr tmc9660::regs::MCC_PWM_Y2_WY1_EXT {.block = Block::Mcc, .offset = 0x203}
 External writable PWM value.
 
constexpr RegAddr tmc9660::regs::MCC_PWM_EXT_Y2_ALT {.block = Block::Mcc, .offset = 0x204}
 External writable PWM compare value for phase Y2_ALT.
 
constexpr RegAddr tmc9660::regs::MCC_VOLTAGE_EXT {.block = Block::Mcc, .offset = 0x205}
 External writable parameter for open-loop voltage control mode, useful during system setup.
 
constexpr RegAddr tmc9660::regs::MCC_PHI_EXT {.block = Block::Mcc, .offset = 0x206}
 Angle phi_e_ext and phi_m_ext for external writing into this register.
 
constexpr RegAddr tmc9660::regs::MCC_VELOCITY_EXT {.block = Block::Mcc, .offset = 0x208}
 Actual velocity for external override.
 
constexpr RegAddr tmc9660::regs::FAULT_STS {.block = Block::SysCtrl, .offset = 0x008}
 General system status flags.
 
constexpr RegAddr tmc9660::regs::FAULT_R_INT {.block = Block::SysCtrl, .offset = 0x009}
 General system status flags.
 
constexpr RegAddr tmc9660::regs::FAULT_R_ENA_F {.block = Block::SysCtrl, .offset = 0x00a}
 Mask for register FAULT_R_INT.
 
constexpr RegAddr tmc9660::regs::ADC_SRC_CONFIG {.block = Block::Adc, .offset = 0x001}
 ADC sources config.
 
constexpr RegAddr tmc9660::regs::ADC_SETUP {.block = Block::Adc, .offset = 0x002}
 ADC setup.
 
constexpr RegAddr tmc9660::regs::ADC_STATUS {.block = Block::Adc, .offset = 0x005}
 ADC status bits.
 
constexpr RegAddr tmc9660::regs::CSA_SETUP {.block = Block::Adc, .offset = 0x007}
 CSA setup.
 
constexpr std::array< RegInfo, 163 > tmc9660::kRegisters
 The register map, sorted by block and offset.
 

Detailed Description

The registers of register mode: block, offset, reset value and access masks of every register of the manual's register map, and the bit fields of each.