|
|
using | VelocityOverwrite = detail::Field< uint32_t, 19U, 1U > |
| | Bits 19:19, RW: the manual's VELOCITY_OVERWRITE.
|
| |
|
using | StopOnVelDeviation = detail::Field< uint32_t, 18U, 1U > |
| | Bits 18:18, RW: the manual's STOP_ON_VEL_DEVIATION.
|
| |
|
using | StopOnPosDeviation = detail::Field< uint32_t, 17U, 1U > |
| | Bits 17:17, RW: the manual's STOP_ON_POS_DEVIATION.
|
| |
|
using | SwHardStop = detail::Field< uint32_t, 16U, 1U > |
| | Bits 16:16, RW: the manual's SW_HARD_STOP.
|
| |
|
using | SoftstopEnable = detail::Field< uint32_t, 15U, 1U > |
| | Bits 15:15, RW: the manual's SOFTSTOP_ENABLE.
|
| |
|
using | SgStopEnable = detail::Field< uint32_t, 14U, 1U > |
| | Bits 14:14, RW: the manual's SG_STOP_ENABLE.
|
| |
|
using | LatchHInactive = detail::Field< uint32_t, 12U, 1U > |
| | Bits 12:12, RW: the manual's LATCH_H_INACTIVE.
|
| |
|
using | LatchHActive = detail::Field< uint32_t, 11U, 1U > |
| | Bits 11:11, RW: the manual's LATCH_H_ACTIVE.
|
| |
|
using | LatchRInactive = detail::Field< uint32_t, 10U, 1U > |
| | Bits 10:10, RW: the manual's LATCH_R_INACTIVE.
|
| |
|
using | LatchRActive = detail::Field< uint32_t, 9U, 1U > |
| | Bits 9:9, RW: the manual's LATCH_R_ACTIVE.
|
| |
|
using | LatchLInactive = detail::Field< uint32_t, 8U, 1U > |
| | Bits 8:8, RW: the manual's LATCH_L_INACTIVE.
|
| |
|
using | LatchLActive = detail::Field< uint32_t, 7U, 1U > |
| | Bits 7:7, RW: the manual's LATCH_L_ACTIVE.
|
| |
|
using | SwapLr = detail::Field< uint32_t, 6U, 1U > |
| | Bits 6:6, RW: the manual's SWAP_LR.
|
| |
|
using | StopHPol = detail::Field< uint32_t, 5U, 1U > |
| | Bits 5:5, RW: the manual's STOP_H_POL.
|
| |
|
using | StopRPol = detail::Field< uint32_t, 4U, 1U > |
| | Bits 4:4, RW: the manual's STOP_R_POL.
|
| |
|
using | StopLPol = detail::Field< uint32_t, 3U, 1U > |
| | Bits 3:3, RW: the manual's STOP_L_POL.
|
| |
|
using | StopHEnable = detail::Field< uint32_t, 2U, 1U > |
| | Bits 2:2, RW: the manual's STOP_H_ENABLE.
|
| |
|
using | StopREnable = detail::Field< uint32_t, 1U, 1U > |
| | Bits 1:1, RW: the manual's STOP_R_ENABLE.
|
| |
|
using | StopLEnable = detail::Field< uint32_t, 0U, 1U > |
| | Bits 0:0, RW: the manual's STOP_L_ENABLE.
|
| |
Fields of MCC_RAMPER_SWITCH_MODE.