|
TMC9660 Driver 0.1.0
API reference
|
Bank 0 numbers. More...
Variables | |
| constexpr uint16_t | SERIAL_ADDRESS = 1 |
| Module address, odd values only. | |
| constexpr uint16_t | SERIAL_HOST_ADDRESS = 2 |
| Host address. | |
| constexpr uint16_t | HEARTBEAT_MONITORING_CONFIG = 3 |
| 0 off, 1 UART, 2 SPI, 3 both. | |
| constexpr uint16_t | HEARTBEAT_MONITORING_TIMEOUT = 4 |
| Timeout in ms. | |
| constexpr uint16_t | IO_DIRECTION_MASK = 5 |
| GPIO direction mask. | |
| constexpr uint16_t | IO_INPUT_PULLUP_PULLDOWN_ENABLE_MASK = 6 |
| Pull resistor enable mask. | |
| constexpr uint16_t | IO_INPUT_PULLUP_PULLDOWN_DIRECTION_MASK = 7 |
| Pull direction mask. | |
| constexpr uint16_t | WAKE_PIN_CONTROL_ENABLE = 10 |
| Enable the WAKE pin function. | |
| constexpr uint16_t | GO_TO_TIMEOUT_POWER_DOWN_STATE |
| Write only: power down for 250 ms to 32 s. | |
| constexpr uint16_t | MAIN_LOOPS = 12 |
| Read only: main loops per second. | |
| constexpr uint16_t | TORQUE_LOOPS = 13 |
| Read only: torque loops per second. | |
| constexpr uint16_t | VELOCITY_LOOPS = 14 |
| Read only: velocity loops per second. | |
| constexpr uint16_t | AUTO_START_ENABLE = 77 |
| Start the script after power-up. | |
| constexpr uint16_t | CLEAR_USER_VARIABLES = 85 |
| Clear the user variables at start-up. | |
Bank 0 numbers.
|
inlineconstexpr |
Write only: power down for 250 ms to 32 s.