|
TMC9660 Driver 0.1.0
API reference
|
| ▼ inc | |
| tmc9660.hpp | TMC9660 driver: the one header to include |
| tmc9660_bootconfig.hpp | The bootloader's configuration memory (64 bytes, datasheet "Bootloader Configuration") as a typed BootConfig, and the external-memory partition table builder |
| tmc9660_detail.hpp | Compile-time helpers of the TMC9660 driver: byte copy, exact hook matching, typed register fields and enumeration checks |
| tmc9660_frames.hpp | Pure frame encoders and decoders of the three TMC9660 protocols: bootloader, parameter mode (TMCL) and register mode, over SPI and UART. No I/O, no state |
| tmc9660_globals.hpp | The global parameters of parameter mode (SGP, GGP): banks 0, 2 and 3 (Tables 61 to 63) |
| tmc9660_kconfig.hpp | Optional ESP-IDF layer: a Config built from the CONFIG_TMC9660_* Kconfig options |
| tmc9660_params.hpp | The axis parameters of parameter mode (SAP, GAP, STAP, AAP): number, range, default and access of every entry of Table 57, and the value constants of the coded ones |
| tmc9660_registers.hpp | The registers of register mode: block, offset, reset value and access masks of every register of the manual's register map, and the bit fields of each |
| tmc9660_spi_interface.hpp | The SPI port of the TMC9660 driver: the CRTP base, the SpiPort concept and the bus requirements |
| tmc9660_types.hpp | Public types of the TMC9660 driver: errors, Result<T>, the protocol enumerations, Config and its model knobs |
| tmc9660_uart_interface.hpp | The UART port of the TMC9660 driver: the CRTP base, the UartPort concept and the bus requirements |