TLE92466ED Driver 0.1.0
API reference
Loading...
Searching...
No Matches
Namespace List
Here is a list of all documented namespaces with brief descriptions:
[detail level 12]
 ▼Ntle92466edThe TLE92466ED driver: everything it declares lives here; internals in detail
 NregThe TLE92466ED register map
 CBistResultThe result of the safety flip-flop self-test (SFF_BIST, section 4.9.8)
 CBusDiagnosticsCounters of the protocol layer (handbook KB-ARCH-044). No I/O to read them
 CChannelConfigEverything the driver writes for one channel. Defaults are the reset values
 CChannelFaultsThe faults and warnings of one channel, decoded (sections 5.3.2.12, 5.3.2.13)
 CChannelFeedbackOne measurement period of a channel's feedback, read under the freeze of section 4.10.5 and converted with Equations 18 to 22, 30 and 31
 CCheckedConfigA configuration proven valid at build time
 CChipIdThe unique chip identification, CHIPID0..2 (sections 5.3.2.24 to 5.3.2.26)
 CConfigEverything EnsureInitialized() writes to the chip, and the driver's own settings
 CDeviceStatusFB_STAT, the chip's one-word status summary, decoded (section 5.3.2.21)
 CDiagConfigThe diagnosis of one channel (CH_CONFIG, CTRL, TON; section 4.9). Defaults are the reset values. On a channel ChannelConfig::loaded does not declare, the driver writes the OFF-state diagnosis off and both open-load thresholds 0, whatever these fields say (handbook KB-CPP-131)
 CDitherConfigThe dither generator of one channel (DITHER_CLK_DIV, DITHER_STEP, DITHER_CTRL; section 4.7). In current control and direct drive the dither period is also the feedback measurement period (section 4.4.2): with mant = 0 the averaged feedback never updates. Defaults are the reset values
 CFaultPinMaskWhich faults pull FAULTN low (FAULT_MASK0..2, sections 5.3.2.14 to 5.3.2.16); true reports the fault on the pin. Defaults are the reset values. A channel loaded does not declare never reaches the pin (KB-CPP-131)
 CFaultsThe diagnosis registers as read: GLOBAL_DIAG0..2, DIAG_ERR_CHGR0..2 and DIAG_WARN_CHGR0..2. Raw words, so a latch is a plain OR; Has() and Of() decode them
 CIccConfigThe integrating current controller of one channel (CTRL, PERIOD, INTEGRATOR_LIMIT, CTRL_INT_THRESH, SETPOINT.AUTO_LIMIT_DIS; section 4.6.2). Defaults are the reset values
 CPinStatusPIN_STAT, decoded (section 5.3.2.20)
 CResultThe value of a call, or why there is none
 CResult< void >The result of a call that returns no value
 CSpiInterfaceCRTP base of the platform SPI port
 CSupplyReadingsThe supply and temperature feedback (FB_VOLTAGE1, FB_VOLTAGE2; 5.3.2.22, 5.3.2.23)
 CTLE92466EDDriver for one TLE92466ED on a platform port
 RSpiPortSatisfied by a class that derives from SpiInterface<Port> and implements the required hooks with exactly the types above, noexcept and returning bool