|
| using | sfm::reg::StatusCommand = detail::Field< uint16_t, 12U, 4U > |
| |
|
using | sfm::reg::StatusSmoothing = detail::Field< uint16_t, 11U, 1U > |
| | Status word, bit 11: exponential smoothing is active (SF06 and SFM3304).
|
| |
|
using | sfm::reg::StatusFixedN = detail::Field< uint16_t, 10U, 1U > |
| | Status word, bit 10: fixed-N averaging is active (SF06 and SFM3304).
|
| |
| using | sfm::reg::StatusConcentration = detail::Field< uint16_t, 0U, 10U > |
| |
|
using | sfm::reg::StatusFilterArg = detail::Field< uint16_t, 9U, 1U > |
| | SFM3304 status word, bit 9: a filter argument was received.
|
| |
|
using | sfm::reg::StatusAverages = detail::Field< uint16_t, 0U, 9U > |
| | SFM3304 status word, bits 8:0: the configured number of averages.
|
| |
|
|
constexpr uint16_t | sfm::reg::kCmdStartGas0 = 0x3603 |
| | Start continuous measurement, gas 0.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdStartGas1 = 0x3608 |
| | Start continuous measurement, gas 1.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdStartGas2 = 0x3615 |
| | Start continuous measurement, gas 2.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdStartGas3 = 0x361E |
| | Start continuous measurement, gas 3.
|
| |
| constexpr uint16_t | sfm::reg::kCmdStartGas4 |
| | Start, gas 4 (SFx6000 argon; reserved on SF06).
|
| |
| constexpr uint16_t | sfm::reg::kCmdStartMixture0 |
| | Start, mixture 0 (argument: O2 in per mille).
|
| |
|
constexpr uint16_t | sfm::reg::kCmdStartMixture1 = 0x3639 |
| | Start, mixture 1.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdStartMixture2 = 0x3646 |
| | Start, mixture 2.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdStartSfxMixture0 = 0x3650 |
| | SFx6000: start, mixture 0.
|
| |
| constexpr uint16_t | sfm::reg::kCmdUpdateConcentration |
| | Update concentration, part 1 (argument).
|
| |
|
constexpr uint16_t | sfm::reg::kCmdResultPointer = 0xE000 |
| | Point the read at the result buffer.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdStop = 0x3FF9 |
| | Stop continuous measurement.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdAveraging = 0x366A |
| | SF06 and SFM3304: configure averaging.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdAveragingDual = 0x364D |
| | SFM3505: configure averaging.
|
| |
| constexpr uint16_t | sfm::reg::kCmdReadScale |
| | Read scale factor, offset and unit (argument).
|
| |
|
constexpr uint16_t | sfm::reg::kCmdSleep = 0x3677 |
| | Enter sleep mode.
|
| |
|
constexpr uint16_t | sfm::reg::kCmdProductId = 0xE102 |
| | Read the product identifier (idle).
|
| |
|
constexpr uint16_t | sfm::reg::kCmdDeviceIdDual = 0x365B |
| | SFM3505: read the device identifier.
|
| |
| constexpr uint16_t | sfm::reg::kCmdSfxScalePointer |
| | SFx6000: point the read at the gas information.
|
| |
| constexpr uint16_t | sfm::reg::kCmdSfxTemperature |
| | SFx6000: point the read at the temperature.
|
| |
|
constexpr uint8_t | sfm::reg::kGeneralCallReset = 0x06 |
| | Byte sent to address 0x00 to reset.
|
| |
|
constexpr uint8_t | sfm::reg::kGeneralCallAddress = 0x00 |
| | The I2C general-call address.
|
| |
|
constexpr uint16_t | sfm::reg::kSf05Flow = 0x1000 |
| | Start flow measurement / point at the flow.
|
| |
|
constexpr uint16_t | sfm::reg::kSf05Temperature = 0x1001 |
| | Point at the temperature.
|
| |
|
constexpr uint16_t | sfm::reg::kSf05Reset = 0x2000 |
| | Soft reset (SFM3x00).
|
| |
|
constexpr uint16_t | sfm::reg::kSf05ScaleFlow = 0x30DE |
| | Flow scale factor.
|
| |
|
constexpr uint16_t | sfm::reg::kSf05OffsetFlow = 0x30DF |
| | Flow offset.
|
| |
| constexpr uint16_t | sfm::reg::kSf05Serial = 0x31AE |
| |
|
constexpr uint16_t | sfm::reg::kSf05SerialLow = 0x31AF |
| | Serial number, least significant word.
|
| |
|
constexpr uint8_t | sfm::reg::kSf04TriggerFlow = 0xF1 |
| | Trigger a flow measurement.
|
| |
|
constexpr uint8_t | sfm::reg::kSf04TriggerTemperature = 0xF3 |
| | Trigger a temperature measurement.
|
| |
|
constexpr uint8_t | sfm::reg::kSf04SoftReset = 0xFE |
| | Soft reset.
|
| |
|
constexpr uint8_t | sfm::reg::kSf04UserRegister = 0xE3 |
| | Read the user register.
|
| |
|
constexpr uint8_t | sfm::reg::kSf04ReadOnly2 = 0xE9 |
| | Read read-only register 2.
|
| |
|
constexpr uint8_t | sfm::reg::kSf04Eeprom = 0xFA |
| | Read the EEPROM.
|
| |
| constexpr uint16_t | sfm::reg::kSf04EepromSerial |
| | EEPROM address of the product serial number.
|
| |
|
constexpr uint16_t | sfm::reg::kSf04EepromScale = 0x02B6 |
| | EEPROM address of the scale factor.
|
| |
|
constexpr uint16_t | sfm::reg::kSf04EepromUnit = 0x02B7 |
| | EEPROM address of the flow-unit word.
|
| |
|
constexpr uint16_t | sfm::reg::kSf04FieldStride = 0x0300 |
| | EEPROM size of one calibration field.
|
| |
| constexpr uint16_t | sfm::reg::kUnitSlm = 0x0148 |
| |
| constexpr uint16_t | sfm::reg::kUnitSccm = 0x0145 |
| |
|
constexpr uint16_t | sfm::reg::kStatusPureGas = 0x3FF |
| | Status bits 9:0 of a pure gas.
|
| |
Command codes with the datasheet section that defines each.