|
PF1550 Driver 0.1.0
API reference
|
Files | |
| pf1550.hpp | |
| PF1550 driver: the one header to include. | |
| pf1550_codec.hpp | |
Register codecs of the PF1550: voltage and current grids of the data sheet tables, as constexpr functions that are total only over the documented codes. | |
| pf1550_config.hpp | |
PF1550 configuration: the application's Limits, its explicit acknowledgements, the typed configuration of every block and Validate(). | |
| pf1550_detail.hpp | |
| Compile-time helpers of the PF1550 driver: typed integer literals, exact hook matching, typed register fields and enumeration checks. | |
| pf1550_i2c_interface.hpp | |
The I2C port of the PF1550 driver: the CRTP base, its pin enums, the I2cPort concept and the register framing. | |
| pf1550_irq.hpp | |
Interrupt map of the PF1550: which register and bit holds each source, and helpers over the events ServiceInterrupts() returns. | |
| pf1550_kconfig.hpp | |
Optional ESP-IDF layer: a Config built from the CONFIG_PF1550_* Kconfig options. | |
| pf1550_plan.hpp | |
The register writes of each configuration block as pure constexpr data. | |
| pf1550_registers.hpp | |
| PF1550 register map: addresses, bit fields, reset values and the access table (datasheet section 12). | |
| pf1550_sequencer.hpp | |
The regulator power-up and power-down sequencer of the PF1550 as pure constexpr data: the pre-programmed start-up options (Table 85), the sequencer timing (Table 84) and the power-down order (section 10.7). | |
| pf1550_types.hpp | |
Public types of the PF1550 driver: errors, Result<T>, enumerations, units, status and interrupt types. | |