|
NTC_THERMISTOR Driver 0.1.0
API reference
|
What the thermistor is: a table, Steinhart-Hart coefficients, or R at a reference temperature and the beta value. More...
#include <ntc_thermistor_types.hpp>
Public Attributes | |
| std::span< const TablePoint > | table = {} |
| uint32_t | r0_ohm {0} |
R at ref_temperature_mc (R25), 1 to kMaxR0Ohm; beta mode. | |
| int32_t | ref_temperature_mc {25'000} |
T0 of r0_ohm: 25 degC for nearly every part. | |
| uint32_t | b_kelvin {0} |
Beta mode: B in kelvin, kMinBetaKelvin to kMaxBetaKelvin. | |
| int32_t | b_t2_mc {85'000} |
| The second temperature of the B pair (B25/85: 85 degC). | |
| uint32_t | r_tol_ppm {0} |
| uint32_t | b_tol_ppm {0} |
| int64_t | sh_a_e15 {0} |
| int64_t | sh_b_e15 {0} |
| int64_t | sh_c_e15 {0} |
| Steinhart-Hart C in units of 1e-15 per kelvin (the cubic term). | |
| uint32_t | curve_error_mc {0} |
What the thermistor is: a table, Steinhart-Hart coefficients, or R at a reference temperature and the beta value.
A non-empty table selects table mode. Otherwise a non-zero sh_b_e15 selects Steinhart-Hart mode (1/T = A + B ln R + C (ln R)^3, R in ohms, T in kelvin) and a zero one selects beta mode, which uses r0_ohm, ref_temperature_mc and b_kelvin. A curve is data: a part is added by writing a Curve, never by changing the driver. tools/ntc_table.py makes a table from any of these descriptions or from a vendor list.
| uint32_t ntc_thermistor::Curve::b_tol_ppm {0} |
Tolerance of B (beta and table modes; 0 = not declared); not with SH.
| uint32_t ntc_thermistor::Curve::curve_error_mc {0} |
Error of the curve itself (fit, interpolation), added to the bound.
| uint32_t ntc_thermistor::Curve::r_tol_ppm {0} |
Tolerance of R at the reference and of the rows; 0 = not declared.
| int64_t ntc_thermistor::Curve::sh_a_e15 {0} |
Steinhart-Hart A in units of 1e-15 per kelvin (0.00087676 is 876'760'000'000).
| int64_t ntc_thermistor::Curve::sh_b_e15 {0} |
Steinhart-Hart B in units of 1e-15 per kelvin; non-zero selects SH mode.
| std::span<const TablePoint> ntc_thermistor::Curve::table = {} |
2 to 256 rows, any spacing, resistance strictly falling as temperature strictly rises. The span is not copied: the rows must outlive the driver (a static constexpr array).