|
ISF15ACP4 Driver 0.1.0
API reference
|
The SSD1331 command set. More...
Variables | |
Opcodes (Table 10) | |
| constexpr uint8_t | kSetColumnAddress = 0x15 |
| 15h + start, end (section 9.1.1). | |
| constexpr uint8_t | kSetRowAddress = 0x75 |
| 75h + start, end (section 9.1.2). | |
| constexpr uint8_t | kSetContrastA = 0x81 |
| 81h + contrast of colour A (9.1.3). | |
| constexpr uint8_t | kSetContrastB = 0x82 |
| 82h + contrast of colour B. | |
| constexpr uint8_t | kSetContrastC = 0x83 |
| 83h + contrast of colour C. | |
| constexpr uint8_t | kMasterCurrent = 0x87 |
| 87h + attenuation 0..15 (9.1.4). | |
| constexpr uint8_t | kPrechargeSpeedA |
| 8Ah + second pre-charge speed of colour A (9.1.5). | |
| constexpr uint8_t | kPrechargeSpeedB = 0x8B |
| 8Bh + speed of colour B. | |
| constexpr uint8_t | kPrechargeSpeedC = 0x8C |
| 8Ch + speed of colour C. | |
| constexpr uint8_t | kRemap = 0xA0 |
| A0h + remap and colour depth (9.1.6). | |
| constexpr uint8_t | kStartLine = 0xA1 |
| A1h + display start line (9.1.7). | |
| constexpr uint8_t | kDisplayOffset = 0xA2 |
| A2h + display offset (9.1.8). | |
| constexpr uint8_t | kModeNormal = 0xA4 |
| A4h: normal display (9.1.9). | |
| constexpr uint8_t | kModeAllOn = 0xA5 |
| A5h: every pixel at GS63. | |
| constexpr uint8_t | kModeAllOff = 0xA6 |
| A6h: every pixel at GS0. | |
| constexpr uint8_t | kModeInverse = 0xA7 |
| A7h: GS0 <-> GS63. | |
| constexpr uint8_t | kMultiplex = 0xA8 |
| A8h + N = multiplex ratio - 1 (9.1.10). | |
| constexpr uint8_t | kDimMode = 0xAB |
| ABh + five bytes (9.1.11). | |
| constexpr uint8_t | kMasterConfig = 0xAD |
| ADh + 8Eh: external VCC (9.1.12). | |
| constexpr uint8_t | kDisplayDim = 0xAC |
| ACh: display on in dim mode (9.1.13). | |
| constexpr uint8_t | kDisplayOff = 0xAE |
| AEh: display off, sleep. | |
| constexpr uint8_t | kDisplayOn = 0xAF |
| AFh: display on, normal brightness. | |
| constexpr uint8_t | kPowerSave = 0xB0 |
| B0h + 1Ah enable or 0Bh disable (9.1.14). | |
| constexpr uint8_t | kPhasePeriods = 0xB1 |
| B1h + phase 1 and 2 periods (9.1.15). | |
| constexpr uint8_t | kClockDivider = 0xB3 |
| B3h + divide ratio and frequency (9.1.16). | |
| constexpr uint8_t | kGrayScaleTable = 0xB8 |
| B8h + 32 pulse widths (9.1.17). | |
| constexpr uint8_t | kLinearGrayScale = 0xB9 |
| B9h: built-in linear table (9.1.18). | |
| constexpr uint8_t | kPrechargeLevel = 0xBB |
| BBh + pre-charge voltage (9.1.19). | |
| constexpr uint8_t | kNopBC = 0xBC |
| BCh: no operation (9.1.21). | |
| constexpr uint8_t | kNopBD = 0xBD |
| BDh: no operation. | |
| constexpr uint8_t | kPrechargeBit0 = 0x01 |
| BBh bit 0: reserved; NKK Table 3 sets it. | |
| constexpr uint8_t | kVcomh = 0xBE |
| BEh + VCOMH level (9.1.20). | |
| constexpr uint8_t | kNopE3 = 0xE3 |
| E3h: no operation. | |
| constexpr uint8_t | kCommandLock = 0xFD |
| FDh + 12h unlock or 16h lock (9.1.22). | |
| constexpr uint8_t | kDrawLine = 0x21 |
| 21h + 7 bytes (9.2.1). | |
| constexpr uint8_t | kDrawRectangle = 0x22 |
| 22h + 10 bytes (9.2.2). | |
| constexpr uint8_t | kCopy = 0x23 |
| 23h + 6 bytes (9.2.3). | |
| constexpr uint8_t | kDimWindow = 0x24 |
| 24h + 4 bytes (9.2.4). | |
| constexpr uint8_t | kClearWindow = 0x25 |
| 25h + 4 bytes (9.2.5). | |
| constexpr uint8_t | kFillEnable = 0x26 |
| 26h + fill and reverse-copy bits (9.2.6). | |
| constexpr uint8_t | kScrollSetup = 0x27 |
| 27h + 5 bytes (9.2.7). | |
| constexpr uint8_t | kScrollOff = 0x2E |
| 2Eh: stop scrolling (9.2.8). | |
| constexpr uint8_t | kScrollOn = 0x2F |
| 2Fh: start scrolling (9.2.9). | |
Parameter values | |
| constexpr uint8_t | kMasterConfigExternalVcc |
| ADh parameter, A[0] = 0 (Table 10 note 1). | |
| constexpr uint8_t | kPowerSaveEnable = 0x1A |
| B0h parameter: power save on (reset value). | |
| constexpr uint8_t | kPowerSaveDisable = 0x0B |
| B0h parameter: power save off. | |
| constexpr uint8_t | kCommandUnlock = 0x12 |
| FDh parameter: unlock (reset value). | |
| constexpr uint8_t | kCommandLockOn = 0x16 |
| FDh parameter: lock. | |
Limits | |
| constexpr uint8_t | kRamColumns = 96 |
| GDDRAM width: columns 0 to 95 (section 7.5.1). | |
| constexpr uint8_t | kRamRows = 64 |
| GDDRAM height: rows 0 to 63. | |
| constexpr uint8_t | kMuxMin = 16 |
| Lowest multiplex ratio (A8h: N from 15). | |
| constexpr uint8_t | kMuxMax = 64 |
| Highest multiplex ratio, the reset value. | |
| constexpr uint8_t | kMasterCurrentMax = 15 |
| 87h: 1/16 to 16/16 (steps 0 to 15). | |
| constexpr uint8_t | kPrechargeSteps = 31 |
| BBh, BEh, ABh E: A[5:1] 0 to 31. | |
| constexpr uint8_t | kPhaseMax = 15 |
| B1h: 1 to 15 DCLK per phase. | |
| constexpr std::size_t | kGrayScaleEntries = 32 |
| B8h: GS1, GS3 ... GS63. | |
| constexpr uint8_t | kGrayScaleMax = 125 |
| B8h: longest pulse width, in DCLK. | |
| constexpr uint8_t | kScrollColumnsMax = 95 |
| 27h A: 0 to 95 columns per step. | |
| constexpr uint8_t | kScrollRowsMax = 63 |
| 27h D: 0 to 63 rows per step. | |
Fill and copy, 26h parameter (section 9.2.6) | |
| constexpr uint32_t | kFillRectangle = 1U << 0 |
| A[0]: fill the rectangle of 22h. | |
| constexpr uint32_t | kReverseCopy = 1U << 4 |
| A[4]: swap GS0 <-> GS63 during 23h. | |
Reset values (section 7.4 and Table 10) | |
| constexpr uint8_t | kResetContrast = 0x80 |
| 81h, 82h, 83h after RES#. | |
| constexpr uint8_t | kResetMasterCurrent = 0x0F |
| 87h after RES#. | |
| constexpr uint8_t | kResetRemap = 0x40 |
| A0h after RES#: 65k, horizontal, normal. | |
| constexpr uint8_t | kResetPhases = 0x74 |
| B1h after RES#. | |
| constexpr uint8_t | kResetClock = 0xD0 |
| B3h after RES#. | |
| constexpr uint8_t | kResetPrecharge = 0x3E |
| BBh and BEh after RES#. | |
Times (sections 7.9 and 12, Table 18; NKK sheet E7) | |
| constexpr uint32_t | kResetPulseMinUs = 3 |
RES# low pulse width, minimum (Table 18, tRW). | |
| constexpr uint32_t | kResetCompleteMaxUs = 2 |
| Reset completion time, maximum (Table 18). | |
| constexpr uint32_t | kResetToVccMinUs = 3 |
| RES# low to VCC on, minimum (section 7.9, t2). | |
| constexpr uint32_t | kDisplayOnDelayMs = 100 |
| AFh to SEG/COM on, maximum (section 7.9, tAF). | |
| constexpr uint32_t | kVccOffTypicalMs = 100 |
| VCC off to VDD off, minimum 0 and typical 100 ms (section 7.9, tOFF). | |
Remap and colour depth, A0h parameter (section 9.1.6) | |
| using | RemapDepth = detail::Field< uint8_t, 6U, 2U > |
| A[7:6]: 00 = 256 colours, 01 = 65k format 1 (reset value), 10 = 65k format 2. | |
| constexpr uint32_t | kRemapVertical = 1U << 0 |
| A[0]: 1 = vertical address increment. | |
| constexpr uint32_t | kRemapColumnReverse = 1U << 1 |
| A[1]: 1 = RAM column 0 at SEG95. | |
| constexpr uint32_t | kRemapColourReverse = 1U << 2 |
| A[2]: 1 = order SC, SB, SA. | |
| constexpr uint32_t | kRemapComSwap = 1U << 3 |
| A[3]: 1 = left-right swap on COM. | |
| constexpr uint32_t | kRemapComScanReverse = 1U << 4 |
| A[4]: 1 = scan COM[N-1] to COM0. | |
| constexpr uint32_t | kRemapComSplit = 1U << 5 |
The SSD1331 command set.