The status word S of #MOXY and #MRAW, decoded (datasheet 4.3, #MOXY). Pure functions of the word; the word is kept whole.
More...
#include <fdo2_types.hpp>
|
|
uint32_t | word {0} |
| | The unsigned 32 bit status word as the module sent it.
|
| |
The status word S of #MOXY and #MRAW, decoded (datasheet 4.3, #MOXY). Pure functions of the word; the word is kept whole.
◆ AmplificationReduced()
| constexpr bool fdo2::Status::AmplificationReduced |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 0: WARNING, detector amplification reduced; the reading is valid.
◆ AnyFatal()
| constexpr bool fdo2::Status::AnyFatal |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Any of the FATAL bits 1 to 5.
◆ Classify()
| constexpr Quality fdo2::Status::Classify |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- The quality class of the word (see
Quality).
◆ HumidityHigh()
| constexpr bool fdo2::Status::HumidityHigh |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 7: WARNING, humidity inside the housing above 90 RH.
◆ HumiditySensorFailed()
| constexpr bool fdo2::Status::HumiditySensorFailed |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 10: ERROR, humidity sensor failure; the pO2 is not affected.
◆ PressureSensorFailed()
| constexpr bool fdo2::Status::PressureSensorFailed |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 9: ERROR, pressure sensor failure; the pO2 is not affected.
◆ ReferenceTooHigh()
| constexpr bool fdo2::Status::ReferenceTooHigh |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 4: FATAL, reference signal or ambient light too high (above 2400 mV).
◆ ReferenceTooLow()
| constexpr bool fdo2::Status::ReferenceTooLow |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 3: FATAL, reference signal intensity too low (below 20 mV).
◆ SignalTooHigh()
| constexpr bool fdo2::Status::SignalTooHigh |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 2: FATAL, oxygen signal or ambient light too high.
◆ SignalTooLow()
| constexpr bool fdo2::Status::SignalTooLow |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 1: FATAL, oxygen signal intensity too low (below 20 mV).
◆ TemperatureSensorFailed()
| constexpr bool fdo2::Status::TemperatureSensorFailed |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Bit 5: FATAL, temperature sensor failure.
◆ UndefinedBits()
| constexpr bool fdo2::Status::UndefinedBits |
( |
| ) |
const |
|
inlineconstexprnoexcept |
- Returns
- Any bit the datasheet does not define: 6, 8 and 11 to 31.
The documentation for this struct was generated from the following file: