|
BNO08X Driver 0.1.0
API reference
|
| ▼Nbno08x | The BNO08x driver: everything it declares lives here; internals in detail |
| Nreg | The BNO08x protocol constants |
| CArvrStabilization | AR/VR stabilisation records 0x3E2D and 0x3E2E (RM S4.2) |
| CBno08x | Driver for one BNO080, BNO085 or BNO086 |
| CCalibrationHelper | A state object that turns the calibration procedure into steps. It sends nothing: it follows what you tell it (Advance(), Observe()) and says what to do next |
| CConfig | The configuration of a session. Config{} is the recommended setup for a BNO085 |
| CDefaultLimits | The sizes of the driver's fixed buffers; pass your own as the second template argument |
| CEnvCalibration | Environmental sensor calibration records 0x39AF, 0x4D20, 0x1AC9, 0x39B1, 0x4DA2 |
| CEulerCentiDeg | Yaw, pitch and roll in centidegrees |
| CEvent | One thing the driver reports, taken with Bno08x::PopEvent() |
| CFeatureConfig | The common feature report of one sensor (RM S6.5.2) |
| CFrsBuffer | A caller-owned buffer for ReadFrs(); it must outlive the operation |
| CGyroRvConfig | Gyro-integrated rotation vector configuration record 0xA1A2 (RM S4.3.12) |
| CHubInterface | CRTP base of the platform port |
| CKconfigLimits | The buffer sizes menuconfig selected; pass it as the second template argument of Bno08x |
| CMeCal | The motion engine's calibration enables (RM S6.4.6) |
| CMetadata | Sensor metadata record (RM Figures 28 and 29, record IDs 0xE301 to 0xE325) |
| CPowerManagement | MotionEngine power management and stability classifier record 0xD3E2 (RM S4.3.1) |
| CProductId | Product ID response (RM S6.3.2) |
| CQuat14 | A quaternion in Q14 (RM S6.4.3.3): the set-reorientation argument |
| CQuat30 | A unit quaternion in Q30 (the orientation records, RM S4.1) |
| CResult | The value of a call, or why there is none |
| CResult< void > | The result of a call that returns no value |
| CRvcFrame | A decoded UART-RVC frame (DS p21) |
| CShakeConfig | Shake detector configuration record 0x7D7D |
| CSignificantMotionConfig | Significant motion detector configuration record 0xC274 |
| CStats | Counters of everything the driver dropped, repaired or noticed. Never reset by the driver |
| CWheelSample | One wheel measurement for dead reckoning (RM S6.4.13) |
| RLimitsLike | What a limits type must provide |
| RHubPort | Satisfied by a class that derives from HubInterface<Port>, names its transport and implements that transport's hooks with exactly the types in the table above |