|
BNO08X Driver 0.1.0
API reference
|
What the BNO08x needs from the SPI bus (handbook KB-CPP-123); the port itself is in bno08x_interface.hpp.
More...
#include <cstdint>Go to the source code of this file.
Namespaces | |
| namespace | bno08x |
The BNO08x driver: everything it declares lives here; internals in detail. | |
Variables | |
Bus requirements | |
A port checks its settings against these with | |
| constexpr uint8_t | bno08x::spi::kSpiMode = 3 |
| SPI mode 3: SCK idles high, data is sampled on the second edge, DS p19. | |
| constexpr bool | bno08x::spi::kMsbFirst = true |
| Each byte is clocked most significant bit first. | |
| constexpr uint32_t | bno08x::spi::kMaxClockHz = 3'000'000 |
| The highest SCK frequency, DS p19. | |
| constexpr uint32_t | bno08x::spi::kMinCsHighNs = 1'000 |
| constexpr uint32_t | bno08x::spi::kCsSetupNs = 100 |
| CS low to the first clock edge, minimum (0.1 us as printed), DS p47. | |
| constexpr uint32_t | bno08x::spi::kCsHoldNs = 17 |
| The last clock edge to CS high, minimum (16.83 ns as printed), DS p47. | |
| constexpr bool | bno08x::spi::kContinuousWord = true |
| One duplex transfer of any length per CS assertion: CS stays low for the whole transfer. | |
What the BNO08x needs from the SPI bus (handbook KB-CPP-123); the port itself is in bno08x_interface.hpp.
|
inlineconstexpr |
The data sheet gives no CS high time; the hub needs at least 1 us between two H_INTN assertions, so keep CS high that long.