ADS9324 Driver 0.1.0
API reference
Loading...
Searching...
No Matches
Public Attributes | List of all members
ads9324::Config Struct Reference

Everything EnsureInitialized() and ApplyConfig() write to the chip. More...

#include <ads9324_types.hpp>

Public Attributes

Interface interface {}
 Data interface.
 
ReferenceSource reference {ReferenceSource::Pin}
 Reference selection.
 
std::array< Input, 16 > inputs {DefaultInputs()}
 AIN1 to AIN16.
 
Filter filter {}
 Digital filter.
 
ChannelSelect channels {}
 Channels in the frame.
 
bool low_speed_crosstalk {false}
 CH_XTALK_LOW_SPEED, for under 100 kSPS per channel.
 
Alarm alarm {}
 DRDY/ALARM pin.
 
Sampling sampling {}
 CONVST and ready wait.
 
Correction correction {}
 Offset and gain stages.
 
Calibration calibration {}
 ADC calibration.
 
std::array< TestPattern, 2 > test_pattern {}
 Group 0 is AIN1 to AIN8, group 1 AIN9 to AIN16.
 
std::array< uint8_t, 2 > window_glitch {}
 DWC glitch filter per group, 0 to 15.
 
DaisyChain daisy {}
 Out of scope.
 
Supply supply {}
 Supply voltages for the range check.
 
bool hardware_reset {false}
 Use the RESET pin at start-up (needs GpioSet()).
 

Detailed Description

Everything EnsureInitialized() and ApplyConfig() write to the chip.

Config{} is the datasheet's initialisation example (Table 7-18: 16-bit words on SDOUT, one lane) over the reset values of every other register; ChipResetConfig() is the chip's reset state, eight lanes on D7 to D0.


The documentation for this struct was generated from the following file: