|
ADS9324 Driver 0.1.0
API reference
|
| ▼Nads9324 | The ADS9324 driver: everything it declares lives here; internals in detail |
| ▼Nreg | The ADS9324 register map |
| CChannelLocation | Where a channel's registers are: the bank and the bank-local index |
| CADS9324 | Driver for one ADS9324 on a platform port |
| CAlarm | The DRDY/ALARM pin (DRDY_ALARM_SEL, GEN_CFG4) |
| CCalibration | Calibration at start-up and the mode RunAdcCalibration() uses |
| CChannelSelect | Which channels the data frame carries (ANA_CFG2) |
| CCheckedConfig | A configuration proven valid when the program is built. An invalid one does not compile |
| CConfig | Everything EnsureInitialized() and ApplyConfig() write to the chip |
| CCorrection | System offset and gain correction stages (GEN_CFG5 of the channel banks) |
| CDaisyChain | Daisy chain settings: out of scope in this version, Validate() refuses enabled |
| CFilter | The digital filter in the data path (DIG_FILTER, GEN_CFG5) |
| CFrame | One decoded data frame |
| CInput | The configuration of one input channel |
| CInterface | The data interface (GEN_CFG3, XOR_BITS_CTL, GEN_CFG4, DIG_DELAY_CFG1/2) |
| CResult | The value of a call, or why there is none |
| CResult< void > | The result of a call that returns no value |
| CSampling | CONVST timing and the ready wait (section 5.6) |
| CSpiInterface | CRTP base of the platform port |
| CSupply | Supplies in millivolts for the range checks; 0 means "not stated" |
| CTestPattern | A test pattern of one channel group (TP_CFG, TP_AIN) |
| CWindow | The digital window comparator of one channel (section 7.3.12) |
| CWindowFlags | The latched digital window comparator flags, one bit per channel (bit 0 is AIN1) |