|
| constexpr uint8_t | ads7952::reg::ReplyAddress (uint16_t reply) noexcept |
| | The 4-bit field DO15:12 of a reply: the channel the result belongs to (DI04 = 0 in the frame before), or the levels of GPIO3:0 (DI04 = 1).
|
| |
| constexpr uint16_t | ads7952::reg::ReplyCode (uint16_t reply) noexcept |
| | The 12-bit conversion result of a reply, DO11:00.
|
| |
| constexpr uint16_t | ads7952::reg::ManualWord (uint8_t channel, uint16_t control) noexcept |
| | A Manual mode word with DI11 = 1: select channel for the next frame and set DI06:00.
|
| |
| constexpr uint16_t | ads7952::reg::AutoWord (uint16_t mode, bool restart, uint16_t control) noexcept |
| | An Auto-1 or Auto-2 mode word with DI11 = 1.
|
| |
| constexpr uint16_t | ads7952::reg::Auto2ProgramWord (uint8_t last) noexcept |
| | The Auto-2 program word: last becomes the last channel of the Auto-2 sequence.
|
| |
| constexpr uint16_t | ads7952::reg::AlarmGroupWord (uint8_t group) noexcept |
| | The first frame of an alarm group's programming sequence.
|
| |
| constexpr uint16_t | ads7952::reg::AlarmThresholdWord (uint8_t channel_in_group, bool high, bool exit, uint16_t threshold) noexcept |
| | One alarm threshold frame of a group's programming sequence.
|
| |
|
|
constexpr uint32_t | ads7952::reg::kCommandShift = 12 |
| | DI15:12 hold the command.
|
| |
|
constexpr uint16_t | ads7952::reg::kCommandMask = 0xF000U |
| | DI15:12.
|
| |
|
constexpr uint16_t | ads7952::reg::kContinue = 0x0000U |
| | 0000: keep the mode, ignore DI11:00.
|
| |
|
constexpr uint16_t | ads7952::reg::kManual = 0x1000U |
| | 0001: Manual mode (Table 1).
|
| |
|
constexpr uint16_t | ads7952::reg::kAuto1 = 0x2000U |
| | 0010: Auto-1 mode (Table 2).
|
| |
|
constexpr uint16_t | ads7952::reg::kAuto2 = 0x3000U |
| | 0011: Auto-2 mode (Table 5).
|
| |
|
constexpr uint16_t | ads7952::reg::kGpioProgram = 0x4000U |
| | 0100: GPIO program register (Table 11).
|
| |
|
constexpr uint16_t | ads7952::reg::kAuto1Program = 0x8000U |
| | 1000: Auto-1 mask in the next frame.
|
| |
|
constexpr uint16_t | ads7952::reg::kAuto2Program = 0x9000U |
| | 1001: Auto-2 last channel (Table 6).
|
| |
|
constexpr uint16_t | ads7952::reg::kAlarmProgramGroup0 = 0xC000U |
| | 11bb: alarm group bb (Table 13).
|
| |
|
constexpr uint16_t | ads7952::reg::kProgramEnable = 0x0800U |
| | DI11: take DI10:00 (Manual: DI06:00).
|
| |
|
constexpr uint16_t | ads7952::reg::kAutoReset = 0x0400U |
| | DI10, Auto modes: restart the sequence.
|
| |
|
constexpr uint32_t | ads7952::reg::kManualChannelShift = 7 |
| | DI10:07, Manual: the next channel.
|
| |
|
constexpr uint16_t | ads7952::reg::kRangeTwoVref = 0x0040U |
| | DI06: 0 to 2 x VREF (Range 2).
|
| |
|
constexpr uint16_t | ads7952::reg::kPowerDown = 0x0020U |
| | DI05: power down at the next frame's end.
|
| |
|
constexpr uint16_t | ads7952::reg::kGpioReadout = 0x0010U |
| | DI04: next reply carries GPIO3:0 in DO15:12.
|
| |
|
constexpr uint16_t | ads7952::reg::kGpioDataMask = 0x000FU |
| | DI03:00: GPIO output levels.
|
| |
|
constexpr uint16_t | ads7952::reg::kControlMask = 0x007FU |
| | DI06:00: the bits a mode word programs.
|
| |
|
constexpr uint32_t | ads7952::reg::kAuto2LastShift = 6 |
| | DI09:06: the last channel of the sequence.
|
| |
|
constexpr uint16_t | ads7952::reg::kGpioResetAll = 0x0200U |
| | DI09: reset every register next frame.
|
| |
|
constexpr uint16_t | ads7952::reg::kGpio3PowerDown = 0x0100U |
| | DI08: GPIO3 is the power-down input.
|
| |
|
constexpr uint16_t | ads7952::reg::kGpio2Range = 0x0080U |
| | DI07: GPIO2 is the range input.
|
| |
|
constexpr uint32_t | ads7952::reg::kGpioAlarmShift = 4 |
| | DI06:04: GPIO0/GPIO1 alarm outputs.
|
| |
|
constexpr uint16_t | ads7952::reg::kGpioDirectionMask = 0x000FU |
| | DI03:00: 1 = output.
|
| |
|
constexpr uint32_t | ads7952::reg::kAlarmChannelShift = 14 |
| | DI15:14: channel within the group.
|
| |
|
constexpr uint16_t | ads7952::reg::kAlarmHigh = 0x2000U |
| | DI13: 1 high threshold, 0 low.
|
| |
|
constexpr uint16_t | ads7952::reg::kAlarmExit = 0x1000U |
| | DI12: leave the sequence after this frame.
|
| |
|
constexpr uint16_t | ads7952::reg::kAlarmThresholdMask = 0x03FFU |
| | DI09:00: the upper 10 result bits.
|
| |
|
constexpr uint16_t | ads7952::reg::kAlarmHighReset = 0x03FFU |
| | High threshold after reset: all ones.
|
| |
|
constexpr uint16_t | ads7952::reg::kAlarmLowReset = 0x0000U |
| | Low threshold after reset: all zeros.
|
| |
|
constexpr uint32_t | ads7952::reg::kChannelsPerAlarmGroup = 4 |
| | Table 12: four channels per group.
|
| |
|
constexpr uint32_t | ads7952::reg::kReplyAddressShift = 12 |
| | DO15:12: channel address or GPIO3:0.
|
| |
| constexpr uint16_t | ads7952::reg::kReplyCodeMask |
| | DO11:00: the 12-bit result, straight binary.
|
| |
Command words, program registers and the reply word.