|
BASIS 2 Driver 0.1.0
API reference
|
| ▼ inc | |
| alicat_basis2.hpp | ALICAT_BASIS2 driver: the one header to include |
| alicat_basis2_ascii.hpp | The ASCII grammar of "BASIS Protocol 2" (M pp.10 to 17): the command table, the encoder, the independent wire validator and the pure reply decoders |
| alicat_basis2_detail.hpp | Compile-time helpers of the ALICAT_BASIS2 driver: exact hook matching, typed register fields and enumeration checks |
| alicat_basis2_kconfig.hpp | Optional ESP-IDF layer: a Config built from the CONFIG_ALICAT_BASIS2_* Kconfig options |
| alicat_basis2_modbus.hpp | The Modbus RTU codec (M pp.18 to 27): CRC-16, request builders, response parser and the second wire validator |
| alicat_basis2_registers.hpp | ALICAT_BASIS2 Modbus register map, magic values, firmware gates and unit tables (M pp.18 to 27, p.31) |
| alicat_basis2_request.hpp | Request and Reply: the only things the driver puts on and takes off the wire, and the timing formulas that size every wait |
| alicat_basis2_types.hpp | Public types of the ALICAT_BASIS2 driver: errors, Result<T>, configuration, enumerations and the values an instrument reports |
| alicat_basis2_uart_interface.hpp | The serial port of the ALICAT_BASIS2 driver: the CRTP base, the UartPort concept and Bus<Port>, the transaction machine shared by every instrument on one serial line |