ADS7952 Driver 0.1.0
API reference
Loading...
Searching...
No Matches
Class List
Here are the classes, structs, unions and interfaces with brief descriptions:
[detail level 12]
 ▼Nads7952The ADS7952 driver: everything it declares lives here; internals in detail
 CADS7952Driver for one ADS7950, ADS7951, ADS7952 or ADS7953 on a platform port
 CAlarmThresholdThe two alarm thresholds of one channel, in 12-bit result codes. The chip keeps the upper 10 bits and compares them with the upper 10 bits of each result (Table 13), so the two lowest bits of a threshold are dropped. AlarmThreshold{} is the reset state: no alarm
 CBankThe result of one Auto-1 or Auto-2 scan: one code per channel of the sequence
 CConfigWhat the driver is told about the chip and the board. Config{} is an ADS7952 in TSSOP left in its reset state (Tables 1 to 13): Range 1, every GPIO an input, every channel in Auto-1, channel 11 the last of Auto-2, no alarm; with a 2.5 V reference and a 5 V analog supply
 CGpioConfigThe GPIO program register and the GPIO output levels. GpioConfig{} is the reset state: every pin an input with no function
 CResultThe value of a call, or why there is none
 CResult< void >The result of a call that returns no value
 CScaleMonitorA channel the board drives with a known voltage, so the driver can prove the scale every code is converted with: the range the chip is really in, and a reference that is present
 CSpiInterfaceCRTP base of the platform SPI port